Digital Input
EL1024
Signal LED1
Signal LED3
Input 1
Input 3
Signal LED2
Signal LED4
Input 2
+24 V
+24 V
Input 4
Power contact 0 V
Power contact
+24 V
+24 V
2-wire
Top view
Contact assembly
Connection
EL1024 | 4-channel digital input terminal 24 V DC for type 2 sensors
The EL1024 digital input terminal acquires the binary 24 V control signals and transmits them, in an electrically isolated form, to the higher-level automation system. The EtherCAT Terminal contains four channels that indicate their signal state by means of light emitting diodes. The input signal of the EL1024 corresponds to IEC 61131-2, type 2. Additionally, the 4-channel EtherCAT Terminal enables the direct connection of four 2-wire sensors. Four +24 V connection points are provided.
| Technical data | EL1024 | ES1024 |
|---|---|
| Number of inputs | 4 |
| Nominal voltage | 24 V DC (-15 %/+20 %) |
| “0“ signal voltage | -3…+5 V (IEC 61131-2, type 2) |
| “1“ signal voltage | 15…30 V (IEC 61131-2, type 2) |
| Input current | typ. 6 mA (IEC 61131-2, type 2) |
| Input filter | 3.0 ms |
| Current consumption E-bus | 110 mA (see documentation) |
| Electrical isolation | 500 Vrms (E-bus/field potential) |
| Bit width in the process image | 4 inputs |
| Configuration | no address or configuration setting |
| Weight | approx. 50 g |
| Operating/storage temperature | 0…+55 °C/-25…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27/29 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos. | IP 20/variable |
| Pluggable wiring | for all ESxxxx terminals |
Product announcement |
EL1024: available ES1024: estimated market release 4th quarter 2008 |