Digital Output
EL2034
Signal LED1
Error LED1
Error LED2
Signal LED2
Output 1
Output 3
Signal LED2
Error LED2
Error LED4
Signal LED4
Output 2
0 V
0 V
Output 4
Power contact 0 V
Power contact
+24 V
+24 V
Top view
Contact assembly
Connection
EL2034 | 4-channel digital output terminal 24 V DC, 2 A, diagnostics
The EL2034 digital output terminal connects the binary 24 V control signals, electrically isolated, with the actuators and contains four channels that indicate their signal state by means of light emitting diodes. The EL2034 offers output diagnostics in the form of short circuit and open circuit detection per channel. The EtherCAT Terminal enables the direct connection of four 2-wire sensors. Four ground connection points are provided.
| Technical data | EL2034 | ES2034 |
|---|---|
| Number of outputs | 4 |
| Rated load voltage | 24 V DC (-15 %/+20 %) |
| Load type | ohmic, inductive, lamp load |
| Max. output current | 2.0 A (short-circuit-proof) per channel |
| Breaking energy | < 1.7 J/channel |
| Current consumption E-bus | typ. 120 mA |
| Electrical isolation | 500 Vrms (E-bus/field potential) |
| Current consumption power contacts | typ. 14 mA + load |
| Bit width in the process image | 4 outputs + 4 diagnostic inputs |
| Configuration | no address or configuration setting |
| Weight | approx. 55 g |
| Operating/storage temperature | 0…+55 °C/-25…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27/29 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos. | IP 20/variable |
| Pluggable wiring | for all ESxxxx terminals |