Digital Input
KL1032
Input 1
Power contacts
Input 2
+48 V
0 V
PE
Signal LED1
Signal LED2
4-wire
3-wire
2-wire
Top view
Contact assembly
Connection
KL1032 | 2-channel digital input terminal 48 V DC
The KL1032 digital input terminal acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. The Bus Terminal contains two channels that indicate their signal state by means of light emitting diodes. Further voltage values are available on request.
| Technical data | KL1032 | KS1032 |
|---|---|
| Number of inputs | 2 |
| Nominal voltage | 48 V DC (-15 %/+20 %) |
| “0“ signal voltage | -6…+10 V |
| “1“ signal voltage | 34…60 V |
| Input filter | 3.0 ms |
| Input current | typ. 3.5 mA |
| Current consumption K-bus | typ. 3 mA |
| Electrical isolation | 500 Vrms (K-bus/field potential) |
| Bit width in the process image | 2 inputs |
| Configuration | no address or configuration setting |
| Weight | approx. 50 g |
| Operating/storage temperature | 0…+55 °C/-25…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27/29 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos. | IP 20/variable |
| Pluggable wiring | for all KSxxxx Bus Terminals |
Product announcement |
KL1032: available KS1032: estimated market release 3rd quarter 2009 |