Digital Output
KL2702
Output 1
Power contacts
Output 2
230 V
N
PE
Signal LED1
Signal LED2
Top view
Contact assembly
Connection
KL2702 | 2-channel solid state load relay up to 230 V AC/DC, 0.3 A
The KL2702 output terminal uses an electronic load relay to switch a mains voltage of up to 230 V AC/DC. The switching element is a high-power MOSFET, which is connected to the power contact potential. As a semiconductor switch, it is not subject to wear. The KL2702 terminal has two independent outputs. Its signal state is indicated by means of light emitting diodes.
| Technical data | KL2702 | KS2702 |
|---|---|
| Number of outputs | 2 x make contacts |
| Rated load voltage | 0…230 V AC/DC |
| Max. output current | 0.3 A steady load on each channel |
| Surge voltage protection | > 275 V |
| Peak current | 0.5 A (20 s), 1.5 A (100 ms) |
| Recommended fuse | ≤ 2 A fast fuse, 1 A slow fuse |
| Contact resistance | 2.1 Ω typ., 3.2 Ω max. |
| Electrical isolation | 500 Vrms (K-bus/field voltage), 2,500 V AC (1 min.) |
| Switching speed | typ. 1.65 ms, 5 ms max. |
| Current consumption K-bus | 10 mA |
| Bit width in the process image | 2 outputs |
| Configuration | no address or configuration setting |
| Weight | approx. 55 g |
| Operating/storage temperature | 0…+55 °C/-25…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27/29 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos. | IP 20/variable |
| Pluggable wiring | for all KSxxxx Bus Terminals |