Analog Output
IE4132
IE4132
Connector
assignment
assignment
I/O
connection
connection
M12 I/O
connection sockets
connection sockets
Signal status display
Labelling areas
Power supply
status display:
Box supply (US)
status display:
Box supply (US)
Auxiliary voltage (UP)
1 | Output +/-
2 | +24 V DC UP
3 | Output GND
4 | GNDP
5 | Shield
2 | +24 V DC UP
3 | Output GND
4 | GNDP
5 | Shield
1 | + 24 V DC Us
2 | + 24 V DC UP
3 | GNDs
4 | GNDP
2 | + 24 V DC UP
3 | GNDs
4 | GNDP
Power supply feed
Power supply down-
stream connection
stream connection
IP-Link interface
IE4132 | 4-channel analog output ±10 V
The IE4132 analog output module generates analog output signals in the range from -10 to +10 V. The voltage is supplied to the process level with a resolution of 16 bits, and is electrically isolated. If necessary, the output scaling can be altered.
Ground potential for the four output channels is common with the 24 V DC supply. The output drivers are powered by the control voltage. The applied load voltage (which can be any value up to 30 V DC) is available for supply of the actuators.
| Technical data | IE4132 |
|---|---|
| Number of outputs | 4 |
| Output connections | M12, screw type |
| Signal current | -10/0…10 V |
| Load | > 5 kΩ |
| Resolution | 16 bits |
| Conversion time | < 4 ms |
| Measuring error | < ±0.1 % (relative to full scale value) |
| Actuator supply | from the auxiliary voltage UP |
| Power supply connection | feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin |
| Bit width in the process image | output: 4 x 16 bit data (4 x 8 bit control/status optional) |
| Electrical isolation | channels/control voltage: yes, between the channels: no, control voltage/fieldbus: yes, via IP-Link |
| Operating/storage temperature | 0…+55 °C/-25…+85 °C |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27/29 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos. | IP 65/66/67 (conforms to EN 60529)/variable |