C6925 | Fanless control cabinet Industrial PC

The Industrial PC C6925 is designed for control cabinet installation. The compact housing is equipped with an Intel® Celeron® M ULV processor on a 3½-inch motherboard. All PC connections are located at the front of the housing. The cooling is done by cooling fins inside the housing. The PC can operate at temperatures up to 55 °C.

C6925	Fanless control cabinet PC
Housing	fanless industrial PC for space-saving control cabinet installation
	mounting sheet at the rear wall
	all connectors on the front
	status LEDs
	lithium battery accessible behind the front flap
	slot for a 2½-inch SATA hard disk behind the front flap
	slot for 1 Compact Flash card behind the front flap
	passive cooling without fan with a heat sink
	5 cm (2") free space on top and bottom of the PC necessary for air circulation
	protection class IP 20
	operating temperature 0…55 °C
	weight of the basic configuration 1.75 kg (3.9 lbs)
	compact dimensions (W x H x D) 65 x 208 x 116 mm (2.6" x 8.2" x 4.6") without mounting plate
Features	processor Intel® Celeron® M ULV 1.0 GHz
	3½-inch motherboard for Intel® Celeron® M or Pentium® M
	1 free Mini PCI slot for cards installed ex factory
	256 MB DDR RAM, expandable ex factory to 2 GB
	on-board graphic adapter, Intel® Extreme Graphic, DVI-I connector
	on-board dual Ethernet adapter with 1 x 10/100BASE-T and 1 x 100/1000BASE-T connector
	64 MB Compact Flash card type I, extended temperature range
	1 serial port RS232 and 4 USB 2.0 ports
	24 V DC power supply
Options	mounting plate at the side wall, instead of plate at the rear wall
	second serial port led out as RS232, RS422 or RS485, optically linked, overload protection
	Mini PCI card with fieldbus interface or Ethernet port
	Mini PCI card with up to 512 kB NOVRAM for fail-safe storage of process data
	larger or second Compact Flash card
	SATA hard disk, 2½-inch, 40 GB
	uninterruptible power supply UPS

Drawings with dimensions

The device must be installed in the orientation that is shown in these drawings.