EL9185-0010 | Potential distribution terminal, 4 x 24 V DC, 4 x 0 V DC, potential supply function
EL9185-0010 | Potential distribution terminal, 4 x 24 V DC, 4 x 0 V DC, potential supply function
The EL9185-0010 potential distribution terminal with additional feed function enables multiple tapping of the supply voltage at the terminal points.
The power contacts are connected to the front-side terminal contacts and are passed through to the adjacent terminal on the right. Due to the additional feed function, the power contacts on the left are not led out, thus creating a new potential group.
The EL9185-0010 eliminates the need for additional terminal blocks on the terminal strip.
Product status:
regular delivery
Product information
- Technical data
- Accessories
- Documentation and downloads
- Beckhoff Information System
- Further information
| Technical data | EL9185-0010 |
|---|---|
| Technology | potential distribution terminal with potential supply function |
| Current load | ≤ 10 A |
| Renewed infeed | yes |
| Nominal voltage | arbitrary up to 230 V AC/DC |
| Electrical isolation | 500 V (E-bus/field potential) |
| Connection facility to additional power contact | 3 |
| Bit width in the process image | 0 |
| Housing width | 12 mm |
| Side by side mounting on
EtherCAT Terminals with power contact | yes |
| Side by side mounting on
EtherCAT Terminals without power contact | yes |
| Weight | approx. 50 g |
| Operating/storage temperature | 0…+55 °C/-25…+85 °C |
| Approvals/markings | CE |
| Housing data | EL-12-8pin | ES-12-8pin |
|---|---|---|
| Design form | compact terminal housing with signal LEDs | terminal housing with pluggable wiring level |
| Material | polycarbonate | |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm | |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock | |
| Side by side mounting by means of | double slot and key connection | |
| Marking | labeling of the BZxxx series | |
| Wiring | solid conductor (e), flexible conductor (f) and ferrule (a): spring actuation by screwdriver | |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² | s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG 28…14, st*: AWG 28…14, f*: AWG 26…16 | s*: AWG 28…16, st*: AWG 28…16, f*: AWG 26…16 |
| Stripping length | 8…9 mm | 9…10 mm |
| Current load power contacts | Imax: 10 A | |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2023 - Terms of Use