The MO2596-0000-1112 LED strobe control module contains a flexible power supply unit that supplies the LED with the required current and voltage. Applications from continuous light to short light pulses in the kHz range are thus possible. Each individual flash can be triggered in a controlled manner by the control system via the distributed clocks/timestamp function. The MO2596-0000-1112 has a trigger output for triggering cameras and high-quality, fast current and voltage control, so that line scan cameras, for example, also benefit from constant illumination. Extensive real-time diagnostics, e.g. for input current/voltage and output current/voltage allow detailed monitoring of the LED light intensity. Thus, overdrive applications with short high-current pulses through the LED are possible. If a specifiable load corridor is exited, e.g., due to load errors, the MO2596-0000-1112 switches off to protect the LED (resettable).
Special features:
- Suitable for lighting-related vision applications up to 24 V DC
- Max. output current 0…3 A in pulse mode / 0…1.2 A in continuous mode
- Different operating modes possible
- Continuous mode (current and voltage output, PWM)
- Pulse operation
- RGB/common anode mode
- Support of XFC technology timestamp
- Synchronized operation through distributed clocks XFC technology possible
Product status:
product announcement
Product information
Technical data | MO2596-0000-1112 |
---|---|
Product category | I/O modules |
Category/version | digital output |
Type | LED control |
Channels | 1 |
Output voltage | 24 V DC (-15 %/+20 %) |
Output current | 0…1.2 A (continuous operation) |
Input voltage | 24 V DC (-15 %/+20 %) |
Connection method | M12 |
Load type | LED (ohmic) |
Peak current | 0...3 A in pulse mode (depending on output voltage and duty cycle) |
Switching times | typ. TON: < 1 µs, typ. TOFF: < 1 µs, pulses from 25 µs…10 s |
Additional in-/outputs | 1x trigger output, 1x trigger input |
Supply voltage from backplane | 24 V DC |
Baseplate interface | data connector |
Diagnostics | yes, status and live data via app |
Distributed clocks | yes |
Hot swap | yes |
TwinCAT version | TwinCAT 3 |
Special features | galvanically isolated inputs |
Weight | approx. 250 g |
Approvals/markings | CE, (UL in preparation) |
Housing data | R1S1T1 |
---|---|
Dimensions (W x H x D) | 30 mm × 110 mm × 32 mm |
Number of rows | 1 |
Number of slots | 1 |
Material | zinc die-cast |
Cooling | convection |
Operating/storage temperature | 0…+50 °C/-25…+85 °C |
Protect. rating/installation pos. | IP65/67/variable |
Loading content ...
© Beckhoff Automation 2024 - Terms of Use