DetachFixClose

EL3182 | 2-channel analog input terminal 4…20 mA, single-ended, 16 bit, HART

EL3182 | 2-channel analog input terminal 4…20 mA, single-ended, 16 bit, HART

EL3182 | 2-channel analog input terminal 4…20 mA, single-ended, 16 bit, HART

Run LED
Error LED 1
HART LED 1
HART error LED 1
Error LED
Error LED 2
HART LED2
HART error
LED2
Power contact
+24 V
Power contact 0 V
Input 1
+UV1
GND
Shield
Input 2
+UV2
GND
Shield
Top view 
Contact assembly 
EL3182 | 2-channel analog input terminal 4…20 mA, single-ended, 16 bit, HART

EL3182 | 2-channel analog input terminal 4…20 mA, single-ended, 16 bit, HART

HART field devices integrated simply: with PC-based control from Beckhoff

Measurement technology easily configured: Analog EtherCAT input terminals.

Measurement technology simply integrated: With the analog EtherCAT Terminals.

HART field devices integrated simply: with PC-based control from Beckhoff

Measurement technology easily configured: Analog EtherCAT input terminals.

Measurement technology simply integrated: With the analog EtherCAT Terminals.

The EL3182 analog input terminal for HART-capable field devices supplies measuring transducers located in the field and transmits their analog measuring signals electrically isolated to the automation device. With a technical measuring range of 107 % of the nominal range, the terminal also supports commissioning with sensor values in the limit range and the evaluation according to NAMUR NE43. The EtherCAT Terminal indicates the signal state by means of light emitting diodes. Error LEDs signal overload and wire breakage, in addition to which LEDs provide information about the state of the HART communication and signal any communication errors.

 

The HART (Highway Addressable Remote Transducer) protocol enables two-way communication through digital data transfer via the analog 4…20 mA wiring. In this way, in addition to the analog current signal, further data can be exchanged with the field device via the superimposed digital signal.

 

The HART communication can also be used for the FDT/DTM concept. The TwinCAT FDT container enables the integration of field device DTMs into TwinCAT Engineering, so that the device configuration and diagnostic functions are available directly within the development environment.

Product status:

Regular delivery

Product information

Loading content ...

Loading content ...

Loading content ...

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2021 - Terms of Use