DetachFixClose

IP2040-B200 | Fieldbus Box, 8-channel digital output, Lightbus, 24 V DC, 2 A (∑ 12 A), Ø8

IP2040-B200 | Fieldbus Box, 8-channel digital output, Lightbus, 24 V DC, 2 A (∑ 12 A), Ø8

IP2040-B200 | Fieldbus Box, 8-channel digital output, Lightbus, 24 V DC, 2 A (∑ 12 A), Ø8

Fieldbus connection (design depends
on the fieldbus)
8 mm I/O connection sockets
Signal status display
Labelling areas
Power supply status display:
Box supply (US)
Auxiliary voltage (UP)
Power supply feed
Power supply feed
1 | +24 V DC US
3 | GND
4 | Output
1 | +24 V UP IN 4-5
2 | +24 V UP IN 6-7
3 | GND
4 | GND
1 | + 24 V DC US
2 | + 24 V UP IN 0-3
3 | GND
4 | GND
2-wire
3-wire
Top view 
I/O connection 
Connector assignment 
IP2040-B200 | Fieldbus Box, 8-channel digital output, Lightbus, 24 V DC, 2 A (∑ 12 A), Ø8

IP2040-B200 | Fieldbus Box, 8-channel digital output, Lightbus, 24 V DC, 2 A (∑ 12 A), Ø8

The IP2040-Bxxx digital output connects the binary control signals from the automation unit on to the actuators at the process level. The eight outputs handle load currents of up to 2 A each, although the total current is limited to 12 A. The outputs are supplied by three load circuits; for this reason these modules do not relay the supply voltage. The signals are connected via 8 mm snap type connectors.

The outputs are short-circuit proof and protected against inverse connection.

Product status:

Regular delivery

Product information

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2021 - Terms of Use