ZB9021 | Industrial Ethernet/EtherCAT cable, shielded, PUR, 1 x 4 x AWG22, capable of torsion, CAT5, green

Electrical data  
Rated voltage 30 V
Insulation resistance ≥ 5GΩ * km
Mutual capacitance 48 nF/km
Characteristic impedance (Ethernet) 100 Ω ±15 Ω
Loop resistance (Ethernet) ≤ 115 Ω/km
Electrical parameters (Ethernet) CAT 5e according to IEC 61156-6
Test voltage 1500 V, 50 Hz, 1 min.
Mechanical data  
Cable structure (Ethernet) star quad
Conductor construction (Ethernet) 19-strand
Cross section (Ethernet) 0.34 mm² (AWG 22/19)
Min. bending radius, moved 8 x outer cable diameter
Outer cable diameter 6.3 mm ± 0.2 mm (0.248" ± 0.0079")
Conductor material (Ethernet) copper, tinned
Optical covering factor of shielding (Ethernet) ≥ 85 %
Use robotic application
Jacket colour green
Material jacket PUR (polyurethane)
Material jacket, further characteristics of halogen-free, flame-retardant, matt and low adhesion
Wire colour code yellow, orange, white, blue
Printing on the jacket XXXX Beckhoff Automation GmbH & Co. KG-Germany-ZB9021 EtherCAT Cat5e Torsion AWG22/19 E170315 AWM20963 AWM I/II A/B 80°C 30V MM/YY RoHS
Printing colour black
Torsion angle in °/m max. ± 180°/m
Torsion speed 36 cycle/min.
Number of torsion cycles 5 million
Claimed torsion length 1 m
Load weight 20 N
Environmental data  
Operation temperature range, moved -30…+70 °C, -22…+158 °F
Oil resistance according to DIN EN 60811-404 (7x24 h/90 °C)
Flame-retardant VW-1 Flame Test UL 1581 section 1080 and IEC 60332-1-2
Halogen-free According to IEC 60754 respectively DIN VDE 0472 part 815
Approvals c(UL)us AWM Style 20963
Attenuation  
Max. insertion loss
Frequency [MHz] 1 4 10 16 20 31.25 62.5 100
[db/100 m] - 4.9 7.8 9.9 11.1 14.1 62.5 26.4
[db/100 ft] - 1.5 2.4 3 3.4 4.3 19.1 8
Min. near-end crosstalk attenuation
Frequency [MHz] 1 4 10 16 20 31.25 62.5 100
[db/100 m] - 56.3 50.3 47.2 45.8 42.9 38.4 35.3
[db/100 ft] - 17.2 15.3 14.4 14 13.1 11.7 10.8

Notes

- The following length tolerances apply: 2-3 %

- Illustrations similar

Ordering information Length
ZB9021

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC® and XTS® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.

 

© Beckhoff Automation GmbH & Co. KG 02/2018

 

The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.