ZB9043 | Sensor cable, PVC, 4 x 0.25 mm², fixed installation, grey

Electrical data  
Rated voltage ≤ 300 V
Insulation resistance ≥ 10 GΩ (according to IEC 60512-2)
Wire resistance (signal/24V) ≤ 58.0 Ω/km (20 °C)
Test voltage ≥ 3000 V
Mechanical data  
Conductor construction (signal/24V) 32 x 0.10 mm
Cross section (signal) 4 x 0.25 mm²
Min. bending radius, fixed installation 5 x outer cable diameter
Weight 33.45 kg/km (22.5 lb/1000 ft)
Outer cable diameter 4.7 mm ± 0.15 mm (0.185" ± 0.0059")
Use fixed installation
Jacket colour grey
Material jacket PVC (polyvinyl chloride)
Wire colour code white, blue, black, brown
Wire insulation material PVC (polyvinyl chloride)
Printing colour white
Environmental data  
Operation temperature range, fixed installation -25…+80 °C, -13…+176 °F
Flame-retardant acc. to DIN EN 60332-2-2
Halogen-free no

Notes

- The following length tolerances apply: 2-3 %

- Illustrations similar

Ordering information Length
ZB9043 sold by the metre

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC® and XTS® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.

 

© Beckhoff Automation GmbH & Co. KG 04/2019

 

The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.