ZB9044 | Sensor cable, PUR, TORSION, 3 x 0.34 mm², capable of torsion, black

Electrical data  
Rated voltage 300 V
Insulation resistance ≥ 500 MΩ/km
Wire resistance (signal/24V) ≤ 58.0 Ω/km (20 °C)
Test voltage ≥ 2000 V
Mechanical data  
Conductor construction (signal/24V) 42 x 0.10 mm, conductor category 6 according to DIN VDE 0295
Cross section (signal) 3 x 0.34 mm² (AWG22)
Min. bending radius, moved 7.5 x outer cable diameter
Min. bending radius, fixed installation 4 x outer cable diameter
Weight 33.7 kg/km (22.65 lb/1000 ft)
Outer cable diameter 4.9 mm ± 0.2mm (0.193" ± 0.0079")
Conductor material (signal/24V) copper bare
Use robotic- and drag chain suitable
Max. acceleration 5 m/s²
Max. speed 3.3 m/s
Max. travel distance 100 m
Max. number of cycles 10 million
Jacket colour black
Material jacket PUR (polyurethane)
Material jacket, further characteristics of weld-spatter resistant, low adhesion
Wire colour code brown, blue, black
Wire insulation material TPE (thermoplastic elastomer)
Printing on the jacket XXXXm Beckhoff Automation GmbH & Co. KG -Germany-Sensor ZB9044-3x0,34mm² E170315 cRUus AWM STYLE 20233 AWM I/II A/B 80°C 300V FT1 MM/YY CE RoHS
Printing colour white
Torsion angle in °/m max. ± 360°/m
Torsion speed 15 cycle/min.
Number of torsion cycles 10 million
Claimed torsion length 2 m
Environmental data  
Operation temperature range, moved -30 °C... +105 °C, -22 °F...+221 °F, UL: up to +80 °C (+176 °F)
Operation temperature range, fixed installation -40...+105 °C, -40...+221 °F
Oil resistance very good oil and chemical resistance
LABS-free yes
Flame-retardant according to IEC 60332-1
Halogen-free yes
Silicone-free yes


- The following length tolerances apply: 2-3 %

Ordering information Length
ZB9044 sold by the metre

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT G®, EtherCAT G10®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC®, XTS® and XPlanar® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.


© Beckhoff Automation GmbH & Co. KG 08/2019


The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.