ZK1090-3131-2xxx | EtherCAT cable, PUR, AWG 26, fixed installation, comfortable installation at short distances

M8, plug, straight, male, 4-pin, A‑coded – M8, plug, straight, male, 4-pin, A‑coded

Plugs

Electrical data Head A Head B
Rated voltage 30 V (according to IEC 61076-2-101) 30 V (according to IEC 61076-2-101)
Rated current 4 A at 40 °C (according to IEC 61076-2-101) 4 A at 40 °C (according to IEC 61076-2-101)
Shielding yes yes
Insulation resistance ≥ 100 GΩ (according to IEC 60512) ≥ 100 GΩ (according to IEC 60512)
Mechanical data    
Installation size M8 M8
Connector type plug plug
Configuration straight straight
Contact type male male
Number of positions (face) 4-pin 4-pin
Coding A‑coded A‑coded
Recommended torque, nut 0.4 Nm 0.4 Nm
Mating cycles ≥ 100 ≥ 100
Way of locking screw screw
Weight per piece 0.028 kg (0.0617 lb) 0.028 kg (0.0617 lb)
Body colour black black
Body material TPU, UL94 TPU, UL94
Coupling nut material GD-Zn, Ni GD-Zn, Ni
Seal FPM FPM
Contact carrier colour green green
Contact carrier material PA 6, UL 94 V-0 PA 6, UL 94 V-0
Contact material CuZn CuZn
Contact plating Ni, Au gal. Ni, Au gal.
Environmental data    
Special features halogen-free, flame-resistant as per IEC 60332-1-2, oil-resistant as per DIN EN 60811-2-1 halogen-free, flame-resistant as per IEC 60332-1-2, oil-resistant as per DIN EN 60811-2-1
RoHS compliant yes yes
Ambient temperature, operation -30…+70 °C, -22…+158 °F -30…+70 °C, -22…+158 °F
Protection class IP 67 in screwed condition (according to IEC 60529) IP 67 in screwed condition (according to IEC 60529)
Pollution level 3/2 (according to IEC 60664-1) 3/2 (according to IEC 60664-1)

Cable

Electrical data  
Rated voltage max. 300 V (peak value, not for high voltage purposes)
Attenuation of shielding ≥ 50 dB (30...100 MHz)
Insulation resistance ≥ 500 MΩ/km
Unbalanced capacitance to ground ≤ 2000 pF/km
Mutual capacitance nom. 50 nF/km
Characteristic impedance (Ethernet) 100 Ω ±15 Ω
Loop resistance (Ethernet) ≤ 260 Ω/km
Dielectric strength wire/wire (Ethernet) 1 kV AC (50 Hz, 1 min.)/1 kV DC (50 Hz)
Dielectric strength wire/shield (Ethernet) 1 kV AC (50 Hz, 1 min.)/1 kV DC (50 Hz)
Signal running time (Ethernet) 4.8 ns/m
Electrical parameters (Ethernet) CAT 5e, according to EN 50288-2-2
Mechanical data  
Cable structure (Ethernet) star quad
Cross section (Ethernet) 0.14 mm² (AWG26)
Min. bending radius, moved 15 x outer cable diameter
Min. bending radius, fixed installation 8 x outer cable diameter, 4 x outher cable diameter (fixed with single bend)
Weight 30.0 kg/km (20.2 lb/1000 ft)
Outer cable diameter 3.65 mm ± 0.15 mm (0.1496" ± 0.0059")
Conductor material Copper bare
Conductor material (Ethernet) copper, tinned
Optical covering factor of shielding (Ethernet) ≥ 85 %
Use fixed installation
Jacket colour green
Material jacket PUR (polyurethane)
Wire colour code yellow, orange, white, blue
Wire insulation material PO (Polyolefine)
Printing on the jacket 00000m Beckhoff Automation GmbH & Co. KG - Germany – Industrial Ethernet / EtherCAT ZB9034 Cat5e AWG26/7 E170315 AWM 20963 AWM I A/B 80°C 30V Fa.No.xxxxx
Printing colour black
Environmental data  
Operation temperature range, moved -30…+70 °C, -22…+158 °F
Operation temperature range, fixed installation -40…+80 °C, -40…+176 °F
UV resistance good
Oil resistance according to DIN EN 60811-404 (7x24 h/90 °C)
Acid, lye and solvent resistance depends on medium, concentration, temperature and duration
Flame-retardant Horizontal flame test according to UL 1581 part 1090
CFC-free yes
Halogen-free According to IEC 60754 respectively DIN VDE 0472 part 815
Silicone-free yes
Attenuation  
Max. insertion loss
Frequency [MHz] 1 4 10 16 20 31.25 62.5 100
[db/100 m] 3.2 6.2 10.5 13.4 14.7 18.8 27.2 35.0
[db/100 ft] 1 1.9 3.2 4.1 4.5 5.7 8.3 10.7
Min. near-end crosstalk attenuation
Frequency [MHz] 1 4 10 16 20 31.25 62.5 100
[db/100 m] 65 56.3 50.3 47.2 45.8 42.9 38.4 35.3
[db/100 ft] 19.8 17.2 15.3 14.4 14 13.1 11.7 10.8
Contact assembly  
Dimensions  
 
 
A1 41.00 mm
B1 41.00 mm

Notes

- Depending on the cable length (L), the following length tolerances apply:

  0 m…<0.2 m: ± 10 mm | 0.2…4.0 m: + 40 mm | ≥ 4.0 m: + 1 %

- Illustrations similar

- Further cable length on request. The last three digits of the ordering information is the cable length in decimeters, e.g.ZKxxxx-xxxx-x020 = cable length 2.00 m

Ordering information Length
ZK1090-3131-2001 0.13 m
ZK1090-3131-2002 0.20 m
ZK1090-3131-2003 0.30 m
ZK1090-3131-2004 0.40 m
ZK1090-3131-2005 0.50 m
ZK1090-3131-2006 0.60 m
ZK1090-3131-2007 0.70 m
ZK1090-3131-2008 0.80 m
ZK1090-3131-2009 0.90 m
ZK1090-3131-2010 1.00 m

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC® and XTS® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.

 

© Beckhoff Automation GmbH & Co. KG 09/2018

 

The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.