ZK2000-3132-0000 | Sensor adapter, flange

M8, plug, straight, male, 4-pin, A‑coded – M8, socket, straight, female, 4-pin, A‑coded

Plugs

Electrical data Head A Head B
Rated voltage 30 V (according to IEC 61076-2-104) 30 V (according to IEC 61076-2-104)
Rated current 4 A at 40 °C (according to IEC 61076-2-104) 4 A at 40 °C (according to IEC 61076-2-104)
Shielding no no
Insulation resistance ≥ 10 GΩ (according to IEC 60512-2) ≥ 10 GΩ (according to IEC 60512-2)
Mechanical data    
Installation size M8 M8
Connector type plug socket
Configuration straight straight
Contact type male female
Number of positions (face) 4-pin 4-pin
Coding A‑coded A‑coded
Recommended torque, nut 0.4 Nm 0.4 Nm
Mating cycles ≥ 100 (according to IEC 60512-9a) ≥ 100 (according to IEC 60512-9a)
Way of locking screw screw
Weight per piece 0.028 kg (0.0617 lb) 0.028 kg (0.0617 lb)
Coupling nut material CuZn, Ni CuZn, Ni
Seal FPM FPM
Contact carrier material TPU GF, UL 94 TPU GF, UL 94
Contact plating Ni, Au gal. Ni, Au gal.
Contact material CuZn CuZn
Environmental data    
Special features halogen-free, flame-resistant as per IEC 60332-1-2, oil-resistant as per DIN EN 60811-2-1 halogen-free, flame-resistant as per IEC 60332-1-2, oil-resistant as per DIN EN 60811-2-1
RoHS compliant yes yes
Ambient temperature (operation) -30...+80 °C, -22...+176 °F -30...+80 °C, -22...+176 °F
Protection class IP 65/67 in screwed condition (according to IEC 60529) IP 65/67 in screwed condition (according to IEC 60529)
Pollution level 3/2 (according to IEC 60664-1) 3/2 (according to IEC 60664-1)
Contact assembly  
Dimensions  
 
 

Notes

- Illustrations similar

Installation dimensions  
Ordering information Length
ZK2000-3132-0000

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT G®, EtherCAT G10®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC®, XTS® and XPlanar® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.

 

© Beckhoff Automation GmbH & Co. KG 09/2020

 

The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.