ZK2000-5152-1xxx | Sensor cable, PUR, 5 x 0.25 mm², fixed installation, shielded

M12, plug, straight, male, 5-pin, A‑coded – M12, socket, straight, female, 5-pin, A‑coded

Plugs

Electrical data Head A Head B
Rated voltage 60 V (according to IEC 61076-2-101) 60 V (according to IEC 61076-2-101)
Rated current 4 A at 40 °C (according to IEC 61076-2-101) 4 A at 40 °C (according to IEC 61076-2-101)
Shielding yes yes
Contact resistance < 10 mΩ < 10 mΩ
Insulation resistance ≥ 100 MΩ (according to IEC 60512) ≥ 100 MΩ (according to IEC 60512)
Mechanical data    
Installation size M12 M12
Connector type plug socket
Configuration straight straight
Contact type male female
Number of positions (face) 5-pin 5-pin
Coding A‑coded A‑coded
Recommended torque, nut 0.6 Nm 0.6 Nm
Mating cycles ≥ 100 (according to IEC 60512-9a) ≥ 100 (according to IEC 60512-9a)
Way of locking screw screw
Weight per piece 0.023 kg (0.0507 lb) 0.023 kg (0.0507 lb)
Body colour black black
Body material TPU, UL 94 HB TPU, UL 94 HB
Coupling nut material GD-Zn, Ni GD-Zn, Ni
Seal FPM FPM
Contact carrier colour red red
Contact carrier material PA, UL 94 V-0 PA, UL 94 V-0
Contact plating Au Ni, Au gal.
Contact material CuZn, Ni b/Au 0.2 gal. CuZn, Ni b/Au 0.2 gal.
Environmental data    
Special features halogen-free, flame-resistant as per IEC 60332-1-2, oil-resistant as per DIN EN 60811-2-1

halogen-free, flame-resistant as per IEC 60332-1-2, oil-resistant as per DIN EN 60811-2-1

RoHS compliant yes yes
Ambient temperature (operation) -30...+85 °C, -22...+185 °F -30...+85 °C, -22...+185 °F
Protection class IP 65/67 in screwed condition (according to IEC 60529) IP 65/67 in screwed condition (according to IEC 60529)
Pollution level 3/2 (according to IEC 60664-1) 3/2 (according to IEC 60664-1)

Cable

Electrical data  
Operating voltage ≤ 300 V
Wire resistance ≤ 78 Ω/km (20 °C)
Test voltage ≥ 3000 V
Mechanical data  
Cross section (signal) 5 x 0.25 mm² (AWG24)
Min. bending radius, moved 10 x outer cable diameter
Min. bending radius, fixed installation 5 x outer cable diameter
Weight 41 kg/km (27.84 lb/1000 ft)
Outer cable diameter 5.4 mm ± 0.2 mm (0.213" ±0.0079")
Shielding yes
Optical covering factor of shielding ≥ 85%
Use fixed installation
Jacket colour black
Material jacket PUR (polyurethane)
Wire colour code brown, white, blue, black, grey
Wire insulation material PP (polypropylene)
Printing colour white
Environmental data  
Operation temperature range, fixed installation -30…+80 °C, -22…+176 °F
Oil resistance according to DIN EN 60811-2-1
Special features Hydrolysis and microbe-resistant, low adhesion
Flame-retardant acc. to cULus 20549
Halogen-free DIN VDE 0472 part 815
RoHS compliant yes
Contact assembly  
Dimensions  
 
 
A1 49.00 mm
A2 20.00 mm
B1 44.00 mm
B2 20.00 mm

Notes

- Depending on the cable length (L), the following length tolerances apply:

  0 m…<0.2 m: ± 10 mm | 0.2…4.0 m: + 40 mm | ≥ 4.0 m: + 1 %

- Illustrations similar

- Further cable length on request. The last three digits of the ordering information is the cable length in decimeters, e.g.ZKxxxx-xxxx-x020 = cable length 2.00 m

Ordering information Length
ZK2000-5152-1050 5.00 m

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT G®, EtherCAT G10®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC®, XTS® and XPlanar® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.

 

© Beckhoff Automation GmbH & Co. KG 12/2019

 

The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.