ZK2000-6100-7xxx | Sensor cable, PP, 4 x 0.25 mm², fixed installation, food & beverage

M12, plug, straight, male, 4-pin, A‑coded – open end, 4-wire

Plugs

Electrical data Head A Head B
Rated voltage x-pin 4-pin, 250 V (IEC 61076-2-101) -
Rated current (signal/24V) 4 A at 40 °C (according to IEC 61076-2-101) -
Shielding no -
Insulation resistance ≥ 10 GΩ (according to IEC 60512-2) -
Mechanical data    
Installation size M12 open end
Connector type plug -
Configuration straight -
Contact type male -
Number of positions (face) 4-pin 4-wire
Coding A‑coded -
Wire termination crimp connection -
Recommended torque, nut 0.6 Nm -
Mating cycles ≤ 100 (according to IEC 60512-9a) -
Way of locking screw -
Body colour black -
Body material thermoplastic elastomer -
Coupling nut material 1.4404 stainless steel -
Seal FPM -
Contact carrier colour red -
Contact carrier material PP GF, UL94 -
Contact material CuZn -
Contact plating Ni, Au gal. -
Environmental data    
RoHS compliant yes -
Ambient temperature, operation -30...+105 °C, -22...+221 °F -
Protection class IP 67 in screwed condition (according to IEC 60529) -
Pollution level 3/2 (according to IEC 60664-1) -

Cable

Electrical data  
Rated voltage 250 V
Operating voltage ≤ 250 V
Insulation resistance ≥ 10 GΩ * km
Test voltage 2000 V, 50 Hz, 5 min
Mechanical data  
Conductor construction (power) 42 x 0.10 mm
Cross section (power) 4 x 0.34 mm² (AWG 22)
Min. bending radius, moved 8 x outer cable diameter
Min. bending radius, fixed installation 5 x outer cable diameter
Weight 30.45 kg/km (20.5 lb/1000 ft)
Conductor material (power) copper bare
Use Food and Beverage
Max. number of cycles 20 million
Wall thickness of wire insulation (signal/24V) 0.15 mm
Jacket colour orange
Material jacket PP (polypropylene)
Wire colour code white, blue, black, brown
Wire insulation material TPE (thermoplastic elastomer)
Printing colour black
Environmental data  
Operation temperature range, moved -40...+105 °C, -40...+221 °F
Operation temperature range, fixed installation -50...105 °C, -58...+221 °F
Flame-retardant according to DIN VDE 0472, part 804, type of test B
Contact assembly  
Dimensions  
A1 49.00 mm

Notes

- Depending on the cable length (L), the following length tolerances apply:

  0 m…0.2 m: ± 10 mm | 0.2…4.0 m: + 40 mm | ≥ 4.0 m: + 1 %

- Illustrations similar

- Further cable length on request. The last three digits of the ordering information is the cable length in decimeters, e.g.ZKxxxx-xxxx-x020 = cable length 2.00 m

Ordering information Length
ZK2000-6100-7050 5.00 m
ZK2000-6100-7100 10.00 m

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC® and XTS® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.

 

© Beckhoff Automation GmbH & Co. KG 07/2017

 

The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.