ZK2000-6162-6xxx | Sensor cable, PUR, 4 x 0.5 mm², torsion resistant

M12, plug, straight, male, 4-pin, A‑coded – M12, socket, straight, female, 4-pin, A‑coded

Plugs

Electrical data Head A Head B
Rated voltage 250 V (according to IEC 61076-2-101) 250 V (according to IEC 61076-2-101)
Rated current 4 A at 40 °C (according to IEC 61076-2-101) 5 A at 40 °C
Rated impulse voltage 1.5 kV -
Shielding no no
Contact resistance < 10 mΩ < 10 mΩ
Insulation resistance - ≥ 100 MΩ (according to IEC 60512)
Mechanical data    
Installation size M12 M12
Connector type plug socket
Configuration straight straight
Contact type male female
Number of positions (face) 4-pin 4-pin
Coding A‑coded A‑coded
Wire termination IDC screw connection
Recommended torque, nut 0.6 Nm 0.6 Nm
Recommended torque, screw termination - 0.3 Nm
Mating cycles ≥ 100 (according to IEC 60512-9a) ≥ 100 (according to IEC 60512-9a)
Way of locking screw screw
Body colour metal black
Body material TPU, self-extinguishing PA6 GF, UL 94
Coupling nut material CuZn, Ni GD-Zn, Ni
Seal FPM elastomers
O-ring - FKM/NBR
Contact carrier colour red black
Contact carrier material TPU GF, UL 94 PA 6, UL 94 V-0
Contact material CuZn CuZn
Contact plating Ni, Au gal. Ni, Au gal.
Max. wire cross section - max. 0.75 mm²
Max. cable outer diameter - 4 - 8 mm
Environmental data    
Special features halogen-free, flame-resistant as per IEC 60332-1-2, oil-resistant as per DIN EN 60811-2-1 -
RoHS compliant yes yes
Ambient temperature, operation -30...+85 °C, -22...+185 °F -30...+85 °C, -22...+185 °F
Protection class IP 67 in screwed condition (according to IEC 60529) IP 67 in screwed condition (according to IEC 60529)
Pollution level 3/2 (according to IEC 60664-1) 3/2 (according to IEC 60664-1)

Cable

Electrical data  
Rated voltage 300 V
Insulation resistance ≥ 500 MΩ/km
Wire resistance (signal/24V) ca. 39 Ω/km
Test voltage ≥ 2000 V
Mechanical data  
Conductor construction (signal/24V) 28 x 0.15 mm, conductor class 6 according to DIN VDE 0295
Cross section (signal) 4 x 0.5 mm² (AWG20)
Min. bending radius, moved 7.5 x outer cable diameter
Min. bending radius, fixed installation 4 x outer cable diameter
Weight 53.6 kg/km (36.02 lb/1000 ft)
Outer cable diameter 6.0 mm ± 0.2 mm ("0.23622 ± 0.0079")
Conductor material (signal/24V) copper bare
Use robotic- and drag chain suitable
Max. acceleration 5 m/s²
Max. speed 3.3 m/s
Max. travel distance 100 m
Max. number of cycles 10 million
Jacket colour black
Material jacket PUR (polyurethane)
Material jacket, further characteristics of weld-spatter resistant, low adhesion
Wire colour code white, blue, black, brown
Wire insulation material TPE (thermoplastic elastomer)
Printing on the jacket XXXXm Beckhoff Automation GmbH & Co. KG -Germany-Sensor ZB9045-4x0,5mm² E170315 cRUus AWM STYLE 20233 AWM I/II A/B 80°C 300V FT1 MM/YY CE RoHS
Printing colour white
Torsion angle in °/m max. ± 360°/m
Torsion speed 15 cycle/min.
Number of torsion cycles 10 million
Claimed torsion length 2 m
Environmental data  
Operation temperature range, moved -30 °C... +105 °C, -22 °F...+221 °F, UL: up to +80 °C (+176 °F)
Operation temperature range, fixed installation -40...+105 °C, -40...+221 °F
Oil resistance very good oil and chemical resistance
LABS-free yes
Flame-retardant according to IEC 60332-1
Halogen-free yes
Silicone-free yes
Contact assembly  
Dimensions  
A1 49.00 mm
B1 57.00 mm
B2 20.00 mm

Notes

- Depending on the cable length (L), the following length tolerances apply:

  0 m…0.2 m: ± 10 mm | 0.2…4.0 m: + 40 mm | ≥ 4.0 m: + 1 %

- Illustrations similar

- Further cable length on request. The last three digits of the ordering information is the cable length in decimeters, e.g.ZKxxxx-xxxx-x020 = cable length 2.00 m

Ordering information Length
ZK2000-6162-6020 2.00 m
ZK2000-6162-6030 3.00 m
ZK2000-6162-6050 5.00 m
ZK2000-6162-6100 10.00 m

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC® and XTS® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.

 

© Beckhoff Automation GmbH & Co. KG 07/2017

 

The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.