ZK2000-6362-0xxx | Sensor cable, PUR, 4 x 0.34 mm², drag-chain suitable

M12, plug, angled, male, 4-pin, A‑coded – M12, socket, straight, female, 4-pin, A‑coded

Plugs

Electrical data Head A Head B
Rated voltage - 250 V (according to IEC 61076-2-101)
Rated current - 5 A at 40 °C
Shielding no no
Contact resistance - < 10 mΩ
Insulation resistance ≥ 10 GΩ (according to IEC 60512-2) ≥ 100 MΩ (according to IEC 60512)
Mechanical data    
Installation size M12 M12
Connector type plug socket
Configuration angled straight
Contact type male female
Number of positions (face) 4-pin 4-pin
Coding A‑coded A‑coded
Wire termination crimp connection screw connection
Recommended torque, nut 0.6 Nm 0.6 Nm
Recommended torque, screw termination - 0.3 Nm
Mating cycles ≤ 100 (according to IEC 60512-9a) ≥ 100 (according to IEC 60512-9a)
Way of locking screw screw
Body colour black black
Body material TPU, self-extinguishing PA6 GF, UL 94
Coupling nut material CuZn, Ni GD-Zn, Ni
Seal FPM elastomers
O-ring - FKM/NBR
Contact carrier colour red black
Contact carrier material TPU GF, UL 94 PA 6, UL 94 V-0
Contact material CuZn CuZn
Contact plating Ni, Au gal. Ni, Au gal.
Max. wire cross section - max. 0.75 mm²
Max. cable outer diameter - 4 - 8 mm
Environmental data    
Special features halogen-free, flame-resistant as per IEC 60332-1-2, oil-resistant as per DIN EN 60811-2-1 -
RoHS compliant yes yes
Ambient temperature, operation -30...+85 °C, -22...+185 °F -30...+85 °C, -22...+185 °F
Protection class IP 67 in screwed condition (according to IEC 60529) IP 67 in screwed condition (according to IEC 60529)
Pollution level 3/2 (according to IEC 60664-1) 3/2 (according to IEC 60664-1)

Cable

Electrical data  
Rated voltage ≤ 300 V
Insulation resistance ≥ 10 GΩ (according to IEC 60512-2)
Wire resistance (signal/24V) ≤ 58.0 Ω/km (20 °C)
Test voltage ≥ 3000 V
Mechanical data  
Conductor construction (power) 42 x 0.10 mm
Cross section (power) 4 x 0.34 mm² (AWG 22)
Min. bending radius, moved 6 x outer cable diameter
Weight 31 kg/km (20.8 lb/1000 ft)
Outer cable diameter 4.7 mm ± 0.15 mm (0.185" ± 0.0059")
Use drag-chain suitable
Max. acceleration 10 m/s²
Max. speed 5 m/s
Max. number of cycles 10 million at max. 20 m travel distance, 2 million at max. 100 m travel distance
Wall thickness of wire insulation (power) ≥ 0.21 mm
Jacket colour black
Material jacket PUR (polyurethane)
Wire colour code white, blue, black, brown
Wire insulation material PP (polypropylene)
Printing colour white
Environmental data  
Operation temperature range, moved -25…+80 °C, -13…+176 °F
Flame-retardant acc. to DIN EN 60332-2-2
Halogen-free DIN VDE 0472 part 815
Approvals UL Listed: FILE E480185
Contact assembly  
Dimensions  
A1 35.00 mm
A2 32.00 mm
B1 57.00 mm
B2 20.00 mm

Notes

- Depending on the cable length (L), the following length tolerances apply:

  0 m…0.2 m: ± 10 mm | 0.2…4.0 m: + 40 mm | ≥ 4.0 m: + 1 %

- Illustrations similar

- Further cable length on request. The last three digits of the ordering information is the cable length in decimeters, e.g.ZKxxxx-xxxx-x020 = cable length 2.00 m

Ordering information Length
ZK2000-6362-0010 1.00 m
ZK2000-6362-0015 1.50 m
ZK2000-6362-0020 2.00 m
ZK2000-6362-0050 5.00 m

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC® and XTS® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.

 

© Beckhoff Automation GmbH & Co. KG 07/2017

 

The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.