ZK2020-3200-7xxx | Power cable, PP, 4 x 0.34 mm², fixed installation, food & beverage

M8, socket, straight, female, 4-pin, A‑coded – open end, 4-wire


Electrical data Head A Head B
Rated voltage x-pin 4-pin, 30 V (according to IEC 61076-2-101) -
Rated current (signal/24V) 4 A at 40 °C (acc.to IEC 61076-2-104) -
Shielding no -
Insulation resistance ≥ 10 GΩ (according to IEC 60512-2) -
Mechanical data    
Installation size M8 open end
Connector type socket -
Configuration straight -
Contact type female -
Number of positions (face) 4-pin 4-wire
Coding A‑coded -
Recommended torque, nut 0.4 Nm -
Mating cycles ≥ 100 (according to IEC 60512-9a) -
Way of locking screw -
Weight per piece 0.028 kg (0.0617 lb) -
Body colour black -
Body material thermoplastic elastomer -
Coupling nut material 1.4404 stainless steel -
Seal FPM -
Contact carrier colour red -
Contact carrier material PP GF, UL94 -
Contact material CuZn -
Contact plating Ni, Au gal. -
Environmental data    
RoHS compliant yes -
Ambient temperature, operation -30...+105 °C, -22...+221 °F -
Protection class IP 67 in screwed condition (according to IEC 60529) -
Pollution level 3/2 (according to IEC 60664-1) -


Electrical data  
Rated voltage 250 V
Operating voltage ≤ 250 V
Insulation resistance ≥ 10 GΩ * km
Test voltage 2000 V, 50 Hz, 5 min
Mechanical data  
Conductor construction (power) 32 x 0.10 mm
Cross section (power) 4 x 0.25 mm² (AWG24)
Min. bending radius, moved 8 x outer cable diameter
Min. bending radius, fixed installation 5 x outer cable diameter
Weight 27 kg/km (18.1 lb/1000 ft)
Conductor material (power) copper bare
Use Food and Beverage
Max. number of cycles 20 million
Wall thickness of wire insulation (signal/24V) 0.15 mm
Jacket colour orange
Material jacket PP (polypropylene)
Wire colour code white, blue, black, brown
Wire insulation material TPE (thermoplastic elastomer)
Printing colour black
Environmental data  
Operation temperature range, moved -40...+105 °C, -40...+221 °F
Operation temperature range, fixed installation -50...105 °C, -58...+221 °F
Flame-retardant according to DIN VDE 0472, part 804, type of test B
Halogen-free yes
Contact assembly  
A1 35.00 mm


- Depending on the cable length (L), the following length tolerances apply:

  0 m…<0.2 m: ± 10 mm | 0.2…4.0 m: + 40 mm | ≥ 4.0 m: + 1 %

- Illustrations similar

- Further cable length on request. The last three digits of the ordering information is the cable length in decimeters, e.g.ZKxxxx-xxxx-x020 = cable length 2.00 m

Ordering information Length
ZK2020-3200-7050 5.00 m
ZK2020-3200-7100 10.00 m

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC® and XTS® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.


© Beckhoff Automation GmbH & Co. KG 03/2018


The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.