ZK2027-3132-0xxx | Power cable, PUR, 4 x 0.34 mm², shielded, drag-chain suitable

M8, plug, straight, male, 4-pin, A‑coded – M8, socket, straight, female, 4-pin, A‑coded


Electrical data Head A Head B
Rated voltage 30 V (according to IEC 61076-2-104) 30 V (according to IEC 61076-2-104)
Rated current 4 A at 40 °C (according to IEC 61076-2-104) 4 A at 40 °C (according to IEC 61076-2-104)
Shielding no no
Insulation resistance ≥ 10 GΩ (according to IEC 60512-2) ≥ 10 GΩ (according to IEC 60512-2)
Mechanical data    
Installation size M8 M8
Connector type plug socket
Configuration straight straight
Contact type male female
Number of positions (face) 4-pin 4-pin
Coding A‑coded A‑coded
Recommended torque, nut 0.4 Nm 0.4 Nm
Mating cycles ≥ 100 (according to IEC 60512-9a) ≥ 100 (according to IEC 60512-9a)
Way of locking screw screw
Weight per piece 0.028 kg (0.0617 lb) 0.028 kg (0.0617 lb)
Body colour black black
Body material TPU, UL94 TPU, UL94
Coupling nut material CuZn, Ni CuZn, Ni
Contact carrier colour red red
Contact carrier material TPU GF, UL 94 TPU GF, UL 94
Contact plating Ni, Au gal. Ni, Au gal.
Contact material CuZn CuZn
Environmental data    
Special features halogen-free, flame-resistant as per IEC 60332-1-2, oil-resistant as per DIN EN 60811-2-1 halogen-free, flame-resistant as per IEC 60332-1-2, oil-resistant as per DIN EN 60811-2-1
RoHS compliant yes yes
Ambient temperature (operation) -30...+80 °C, -22...+176 °F -30...+80 °C, -22...+176 °F
Protection class IP 65/67 in screwed condition (according to IEC 60529) IP 65/67 in screwed condition (according to IEC 60529)
Pollution level 3/2 (according to IEC 60664-1) 3/2 (according to IEC 60664-1)


Electrical data  
Rated voltage ≤ 300 V
Insulation resistance ≥ 100 GΩ * km
Wire resistance (signal/24V) ≤ 58.0 Ω/km (20 °C)
Test voltage ≥ 3000 V
Mechanical data  
Conductor construction (power) 42 x 0.10 mm
Cross section (power) 4 x 0.34 mm² (AWG 22)
Min. bending radius, moved 6 x outer cable diameter
Weight 43 kg/km (28.8 lb/1000 ft)
Outer cable diameter 5.4 mm ± 0.2 mm (0.213" ±0.0079")
Optical covering factor of shielding (total) yes
Use drag-chain suitable
Wall thickness of wire insulation (power) ≥ 0.21 mm
Jacket colour black
Material jacket PUR (polyurethane)
Wire colour code white, blue, black, brown
Wire insulation material PP (polypropylene)
Printing colour white
Environmental data  
Operation temperature range, moved -25…+80 °C, -13…+176 °F
Flame-retardant according to cULus 20549
Halogen-free DIN VDE 0472 part 815
Contact assembly  
A1 39.60 mm
B1 33.00 mm


- Depending on the cable length (L), the following length tolerances apply:

  0 m…<0.2 m: ± 10 mm | 0.2…4.0 m: + 40 mm | ≥ 4.0 m: + 1 %

- Illustrations similar

- Further cable length on request. The last three digits of the ordering information is the cable length in decimeters, e.g.ZKxxxx-xxxx-x020 = cable length 2.00 m

Ordering information Length
ZK2027-3132-0002 0.20 m
ZK2027-3132-0005 0.50 m
ZK2027-3132-0010 1.00 m
ZK2027-3132-0030 3.00 m
ZK2027-3132-0050 5.00 m
ZK2027-3132-0100 10.00 m
ZK2027-3132-0150 15.00 m
ZB8801-0000 torque wrench for hexagonal plugs, adjustable
ZB8801-0001 torque cable key, M8/wrench size 9, for ZB8801-0000

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT G®, EtherCAT G10®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC®, XTS® and XPlanar® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.


© Beckhoff Automation GmbH & Co. KG 03/2020


The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.