ZK2027-3200-0xxx | Power cable, PUR, 4 x 0.34 mm², shielded, drag-chain suitable
M8, socket, straight, female, 4-pin, A‑coded – open end, 4-wire + shielding
Plugs
| Electrical data | Head A | Head B |
|---|---|---|
| Rated voltage | 30 V (according to IEC 61076-2-104) | - |
| Rated current | 4 A at 40 °C (according to IEC 61076-2-104) | - |
| Shielding | no | - |
| Insulation resistance | ≥ 10 GΩ (according to IEC 60512-2) | - |
| Mechanical data | ||
| Installation size | M8 | open end |
| Connector type | socket | - |
| Configuration | straight | - |
| Contact type | female | - |
| Number of positions (face) | 4-pin | 4-wire + shielding |
| Coding | A‑coded | - |
| Recommended torque, nut | 0.4 Nm | - |
| Mating cycles | ≥ 100 (according to IEC 60512-9a) | - |
| Way of locking | screw | - |
| Weight per piece | 0.028 kg (0.0617 lb) | - |
| Body colour | black | - |
| Body material | TPU, UL94 | - |
| Coupling nut material | CuZn, Ni | - |
| Seal | FPM | - |
| Contact carrier colour | red | - |
| Contact carrier material | TPU GF, UL 94 | - |
| Contact plating | Ni, Au gal. | - |
| Contact material | CuZn | - |
| Environmental data | ||
| Special features | halogen-free, flame-resistant as per IEC 60332-1-2, oil-resistant as per DIN EN 60811-2-1 | - |
| RoHS compliant | yes | - |
| Ambient temperature (operation) | -30...+80 °C, -22...+176 °F | - |
| Protection class | IP 65/67 in screwed condition (according to IEC 60529) | - |
| Pollution level | 3/2 (according to IEC 60664-1) | - |
 |
|
|
Cable
| Electrical data | |
|---|---|
| Rated voltage | ≤ 300 V |
| Insulation resistance | ≥ 100 GΩ * km |
| Wire resistance (signal/24V) | ≤ 58.0 Ω/km (20 °C) |
| Test voltage | ≥ 3000 V |
| Mechanical data | |
| Conductor construction (power) | 42 x 0.10 mm |
| Cross section (power) | 4 x 0.34 mm² (AWG 22) |
| Min. bending radius, moved | 6 x outer cable diameter |
| Weight | 43 kg/km (28.8 lb/1000 ft) |
| Outer cable diameter | 5.4 mm ± 0.2 mm (0.213" ±0.0079") |
| Optical covering factor of shielding (total) | yes |
| Use | drag-chain suitable |
| Wall thickness of wire insulation (power) | ≥ 0.21 mm |
| Jacket colour | black |
| Material jacket | PUR (polyurethane) |
| Wire colour code | white, blue, black, brown |
| Wire insulation material | PP (polypropylene) |
| Printing colour | white |
| Environmental data | |
| Operation temperature range, moved | -25…+80 °C, -13…+176 °F |
| Flame-retardant | according to cULus 20549 |
| Halogen-free | DIN VDE 0472 part 815 |
|
|
| Contact assembly | |
|---|---|
 |
|
|
|
| Dimensions | |
|---|---|
  |
|
| A1 | 33.00 mm |
|
|
Notes
- Depending on the cable length (L), the following length tolerances apply:
0 m…<0.2 m: ± 10 mm | 0.2…4.0 m: + 40 mm | ≥ 4.0 m: + 1 %
- Illustrations similar
- Further cable length on request. The last three digits of the ordering information is the cable length in decimeters, e.g.ZKxxxx-xxxx-x020 = cable length 2.00 m
| Ordering information | Length |
|---|---|
| ZK2027-3200-0010 | 1.00 m |
| ZK2027-3200-0030 | 3.00 m |
| ZK2027-3200-0050 | 5.00 m |
| ZK2027-3200-0100 | 10.00 m |
| ZK2027-3200-0150 | 15.00 m |
|
|
| Accessories | |
|---|---|
| ZB8801-0000 | torque wrench for hexagonal plugs, adjustable |
| ZB8801-0001 | torque cable key, M8/wrench size 9, for ZB8801-0000 |
|
|
Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT G®, EtherCAT G10®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC®, XTS® and XPlanar® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.
© Beckhoff Automation GmbH & Co. KG 03/2020
The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract. |