ZK2030-1114-0xxx | Power cable, PUR, 5 x 1.5 mm², drag-chain suitable

7/8", plug, straight, male, 5-pin – 7/8", socket, angled, female, 5-pin


Electrical data Head A Head B
Rated voltage 300 V (according to IEC 61076-2-101) 300 V (according to IEC 61076-2-101)
Rated current 16 A at 40 °C (according to IEC 60512-3), 1.5 mm²: 10 A (according to UL2238), 2.5 mm²: 12 A (according to UL2238) 16 A at 40 °C (according to IEC 60512-3), 1.5 mm²: 10 A (according to UL2238), 2.5 mm²: 12 A (according to UL2238)
Rated impulse voltage 2.7 kV 2.7 kV
Shielding no no
Insulation resistance ≥ 100 MΩ (IEC 60512) ≥ 100 MΩ (IEC 60512)
Mechanical data    
Installation size 7/8" 7/8"
Connector type plug socket
Configuration straight angled
Contact type male female
Number of positions (face) 5-pin 5-pin
Mating cycles ≥ 100 (according to IEC 60512-9a) ≥ 100 (according to IEC 60512-9a)
Way of locking screw screw
Body colour black black
Body material PA6 GF, UL 94 TPU, UL 94
Coupling nut material CuZn, Ni CuZn, Ni
Seal elastomers FPM
Contact carrier colour black red
Contact carrier material PA 6 GF, UL 94 V-0 TPU GF, UL 94
Contact material CuZn CuZn
Contact plating Ni, Au gal. Ni, Au gal.
Environmental data    
Special features - halogen-free, flame-resistant as per IEC 60332-1-2, oil-resistant as per DIN EN 60811-2-1
RoHS compliant yes yes
Ambient temperature, operation -40...+85 °C, -40...+185 °F -30...+80 °C, -22...+176 °F
Protection class IP 67 in screwed condition (according to IEC 60529) IP 68 in screwed condition (according to IEC 60529)
Pollution level 3/2 (according to IEC 60664-1) 3/2 (according to IEC 60664-1)


Electrical data  
Rated voltage ≤ 300 V
Insulation resistance ≥ 10 GΩ (according to IEC 60512-2)
Wire resistance (power) ≤ 13.3 Ω/km (DIN EN 50395)
Test voltage ≥ 3000 V
Mechanical data  
Conductor construction (power) 84 x 0.15 mm
Cross section (power) 5 x 1.5 mm² (approx. AWG16)
Min. bending radius, moved 6 x outer cable diameter
Weight 112.19 kg/km (75.39 lb/1000 ft)
Outer cable diameter 7.8 mm ± 0.2 mm (0.3071" ± 0.0079")
Use drag-chain suitable
Max. acceleration 10 m/s²
Max. speed 5 m/s
Max. number of cycles 10 million at max. 20 m travel distance, 2 million at max. 100 m travel distance
Wall thickness of wire insulation (power) 0.26 mm
Jacket colour black
Material jacket PUR (polyurethane)
Wire colour code brown, white, black, blue, grey
Wire insulation material PP (polypropylene)
Printing colour white
Environmental data  
Operation temperature range, moved -25…+80 °C, -13…+176 °F
Flame-retardant acc. to cULus 20549
Halogen-free DIN VDE 0472 part 815
Contact assembly  
A1 78.00 mm
A2 26.00 mm
B1 46.00 mm
B2 40.80 mm


- Depending on the cable length (L), the following length tolerances apply:

  0 m…<0.2 m: ± 10 mm | 0.2…4.0 m: + 40 mm | ≥ 4.0 m: + 1 %

- Illustrations similar

- Further cable length on request. The last three digits of the ordering information is the cable length in decimeters, e.g.ZKxxxx-xxxx-x020 = cable length 2.00 m

Ordering information Length
ZK2030-1114-0030 3.00 m

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC® and XTS® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.


© Beckhoff Automation GmbH & Co. KG 07/2018


The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.