ZK2031-1200-0xxx | Power cable, PUR, 5 x 2.5 mm², drag-chain suitable

7/8", socket, straight, female, 5-pin – open end, 5-wire

Plugs

Electrical data Head A Head B
Rated voltage 300 V (according to IEC 61076-2-101) -
Rated current 16 A at 40 °C (according to IEC 60512-3), 1.5 mm²: 10 A (according to UL2238), 2.5 mm²: 12 A (according to UL2238) -
Rated impulse voltage 2.7 kV -
Shielding no -
Insulation resistance ≥ 100 MΩ (IEC 60512) -
Mechanical data    
Installation size 7/8" open end
Connector type socket -
Configuration straight -
Contact type female -
Number of positions (face) 5-pin 5-wire
Mating cycles ≥ 100 (according to IEC 60512-9a) -
Way of locking screw -
Body colour black -
Body material TPU, UL 94 -
Coupling nut material CuZn, Ni -
Seal FPM -
Contact carrier colour red -
Contact carrier material TPU GF, UL 94 -
Contact material CuZn -
Contact plating Ni, Au gal. -
Environmental data    
Special features halogen-free, flame-resistant as per IEC 60332-1-2, oil-resistant as per DIN EN 60811-2-1 -
RoHS compliant yes -
Ambient temperature, operation -30...+80 °C, -22...+176 °F -
Protection class IP 67 in screwed condition (according to IEC 60529) -
Pollution level 3/2 (according to IEC 60664-1) -

Cable

Electrical data  
Rated voltage ≤ 300 V
Insulation resistance ≥ 10 GΩ * km
Wire resistance (power) ≤ 8 Ω/km
Test voltage ≥ 3000 V
Mechanical data  
Conductor construction (power) 141 x 0.15 mm
Cross section (power) 5 x 2.5 mm² (approx. AWG14)
Min. bending radius, moved 10 x outer cable diameter
Min. bending radius, fixed installation 5 x outer cable diameter
Weight 168 kg/km (112.89 lb/1000 ft)
Outer cable diameter 9.1 mm ± 0.2 mm (0.3583" ± 0.0079")
Conductor material (power) copper bare
Use drag-chain suitable
Max. acceleration 10 m/s²
Max. speed 3 m/s
Max. travel distance 10 m
Jacket colour black
Material jacket PUR (polyurethane)
Wire colour code brown, white, black, blue, grey
Wire insulation material PP (polypropylene)
Printing colour white
Environmental data  
Operation temperature range, moved -25…+80 °C, -13…+176 °F
Oil resistance 168 h 100°C (according to DIN EN 60811-2-1)
Flame-retardant according to UL 758/1581 (cUL-FT2)
Halogen-free DIN VDE 0472 part 815
Contact assembly  
Dimensions  
 
 
A1 53.90 mm

Notes

- Depending on the cable length (L), the following length tolerances apply:

  0 m…<0.2 m: ± 10 mm | 0.2…4.0 m: + 40 mm | ≥ 4.0 m: + 1 %

- Illustrations similar

- Further cable length on request. The last three digits of the ordering information is the cable length in decimeters, e.g.ZKxxxx-xxxx-x020 = cable length 2.00 m

Ordering information Length
ZK2031-1200-0030 3.00 m
ZK2031-1200-0050 5.00 m
ZK2031-1200-0100 10.00 m
ZK2031-1200-0200 20.00 m
ZK2031-1200-0300 30.00 m
ZK2031-1200-0450 45.00 m
ZK2031-1200-0600 60.00 m

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC® and XTS® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.

 

© Beckhoff Automation GmbH & Co. KG 07/2018

 

The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.