ZK4054-6400-0xxx | Control cable, PUR, 3 x 0.75 mm², drag-chain suitable

M12, socket, angled, female, 4-pin, A‑coded – open end, 3-wire

Plugs

Electrical data Head A Head B
Rated voltage 250 V (according to IEC 61076-2-101) -
Rated current 7,5 A at 40 °C (according to IEC 61076-2-101) -
Shielding no -
Contact resistance < 10 mΩ -
Insulation resistance ≥ 100 MΩ (according to IEC 60512) -
Mechanical data    
Installation size M12 open end
Connector type socket -
Configuration angled -
Contact type female -
Number of positions (face) 4-pin 3-wire
Coding A‑coded -
Recommended torque, nut 0.6 Nm -
Recommended torque, screw termination 0.3 Nm -
Mating cycles ≥ 100 (according to IEC 60512-9a) -
Way of locking screw -
Weight per piece 0.023 kg (0.0507 lb) -
Body colour black -
Body material PA6 GF, UL 94 HB -
Coupling nut material CuZn, Ni -
Seal elastomers -
O-ring FPM/NBR -
Contact carrier colour red -
Contact carrier material PA 6, UL 94 V0 -
Contact plating Au -
Contact material CuZn, Ni b/Au 0.2 gal. -
Environmental data    
RoHS compliant yes -
Ambient temperature (operation) -30...+85 °C, -22...+185 °F -
Protection class IP 65/67 in screwed condition (according to IEC 60529) -
Pollution level 3/2 (according to IEC 60664-1) -

Cable

Electrical data  
Rated voltage ≤ 600 V
Insulation resistance ≥ 1 GΩ * km
Wire resistance (signal/24V) ≤ 26.0 Ω/km (DIN EN 50395)
Test voltage ≥ 6000 V
Mechanical data  
Conductor construction 42 x 0.15 mm
Cross section 3 x 0.75 mm²
Min. bending radius, moved 10 x outer cable diameter
Weight 50 kg/km (33.60 lb/1000 ft)
Outer cable diameter 6.0 mm ± 0.2 mm ("0.23622 ± 0.0079")
Use drag-chain suitable
Max. acceleration 10 m/s²
Max. speed 3 m/s
Max. travel distance 10 m
Max. number of cycles 4 million
Jacket colour black
Material jacket PUR (polyurethane)
Wire colour code brown, blue, green/yellow
Wire insulation material PP (polypropylene)
Printing colour white
Environmental data  
Operation temperature range, moved -15…+80 °C, +5…+176 °F
Oil resistance according to DIN EN 60811-2-1
Flame-retardant according to AWM Style 20549, UL 758/1581 FT1, DIN EN 60332-2-2
Halogen-free according to DIN VDE 0472 part 815, DIN EN 50267-2-1
Contact assembly  
Dimensions  
 
 
A1 35.00 mm
A2 26.80 mm

Notes

- Depending on the cable length (L), the following length tolerances apply:

  0 m…<0.2 m: ± 10 mm | 0.2…4.0 m: + 40 mm | ≥ 4.0 m: + 1 %

- Illustrations similar

- Further cable length on request. The last three digits of the ordering information is the cable length in decimeters, e.g.ZKxxxx-xxxx-x020 = cable length 2.00 m

Ordering information Length
ZK4054-6400-0010 1.00 m
ZK4054-6400-0030 3.00 m
ZK4054-6400-0050 5.00 m
ZK4054-6400-0100 10.00 m
ZK4054-6400-0200 20.00 m

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT G®, EtherCAT G10®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC®, XTS® and XPlanar® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.

 

© Beckhoff Automation GmbH & Co. KG 03/2020

 

The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.