ZK7000-0105-1xxx | EtherCAT P cable, AWG 22, PUR, fixed installation

M8, plug, straight, male, 4-pin, P-coded – M8, flange, straight, female, 4-pin, P-coded

Plugs

Electrical data Head A Head B
Rated voltage 24 V DC (according to IEC 61076-2-104) 24 V DC (according to IEC 61076-2-104)
Rated current 3 A at 40 °C (according to IEC 61076-2-104) 3 A at 40 °C (according to IEC 61076-2-104)
Shielding yes yes
Insulation resistance ≥ 100 GΩ (according to IEC 60512) ≥ 100 GΩ (according to IEC 60512)
Mechanical data    
Installation size M8 M8
Connector type plug flange
Configuration straight straight
Contact type male female
Number of positions (face) 4-pin 4-pin
Coding P-coded P-coded
Recommended torque, nut 0.4 Nm 0.6 ... 0.8 Nm
Mating cycles ≥ 100 ≥ 100
Way of locking screw screw
Body colour black black
Body material TPU, UL 94 TPU, UL 94 HB
Coupling nut material CuZn, Ni GD-Zn, Ni
Lock nut material - CuZn, Ni
Seal FPM FPM
Contact carrier colour red red
Contact carrier material PA, UL 94 PA, UL 94
Contact plating Ni, Au gal. Ni, Au gal.
Contact material CuZn CuZn
Environmental data    
UV resistance yes yes
RoHS compliant yes yes
Ambient temperature (operation) -40...+85 °C, -40...+185 °F -30…+70 °C, -22…+158 °F
Protection class IP 65/67 in screwed condition (according to IEC 60529) IP 67 in screwed condition (according to IEC 60529)
Pollution level 3/2 (according to IEC 60664-1) 3/2 (according to IEC 60664-1)

Cable

Electrical data  
Rated voltage max. 300 V (peak value, not for high voltage purposes)
Attenuation of shielding ≥ 65 dB (30...100 MHz)
Insulation resistance ≥ 500 MΩ * km (DIN EN 50395)
Unbalanced capacitance to ground ≤ 2000 pF/km
Mutual capacitance 45 ± 15 pF/m at 800 Hz according to EN 50289-1-5
Characteristic impedance (Ethernet) 100 Ω ±5 Ω (100 MHz) (EN 50289-1-11)
Loop resistance ≤ 110 Ω/km
Dielectric strength wire/wire (Ethernet) 1 kV (50 Hz, 1 min.)
Dielectric strength wire/shield (Ethernet) 1 kV AC (50 Hz, 1 min.)/1 kV DC (50 Hz)
Signal running time (Ethernet) 4.8 ns/m
Electrical parameters (Ethernet) based on CAT 5
Test voltage 1000 V, 50 Hz, 1 min. (wire/wire and wire/screen)
Mechanical data  
Cable structure (Ethernet) star quad
Conductor construction (Ethernet) 7-strand
Cross section (Ethernet) 1 x 4 x 0.34 mm² (AWG 22)
Min. bending radius, moved 8 x outer cable diameter
Min. bending radius, moved in drag chain 8 x outher cable diameter
Min. bending radius, fixed installation 5 x outer cable diameter
Weight 50 kg/km (33.6 lb/1000 ft)
Outer cable diameter 5.1 mm ± 0.15 mm (0.200787" ± 0.0059")
Conductor material (Ethernet) copper, tinned
Shielding aluminium-clad foil, braiding of tinned copper wires, coupling
Optical covering factor of shielding (Ethernet) ≥ 85 %
Use fixed installation
Jacket colour black (similar to RAL 9005) with red stripe (similar to RAL 3020)
Material jacket PUR (polyurethane)
Wire colour code yellow, orange, white, blue
Wire insulation material PO (Polyolefine)
Printing on the jacket Beckhoff Automation GmbH & Co. KG - Germany - EtherCATp Cat5e AWG22/7 E170315 AWM 21198 AWM I/II A/B 80°C 300 V MM/YY RoHS
Printing colour white
Max. tensile load, dynamic 20 N/mm²
Max. tensile load, static 50 N/mm²
Environmental data  
Operation temperature range, moved -30…+80 °C, -22…+176 °F
Operation temperature range, fixed installation -40…+80 °C, -40…+176 °F
UV resistance yes
Oil resistance According to DIN EN 60811-404
Flame-retardant FT-2
CFC-free yes
Halogen-free DIN VDE 0472 part 815
Silicone-free yes
Attenuation  
Max. insertion loss
Frequency [MHz] 1 4 10 16 20 31.25 62.5 100
[db/100 m] 3.3 5.3 7.5 9.1 10.1 12.4 17.6 22.5
[db/100 ft] 1 1.6 2.3 2.8 3.1 3.8 5.4 6.9
Min. near-end crosstalk attenuation
Frequency [MHz] 1 4 10 16 20 31.25 62.5 100
[db/100 m] 65 56.3 50.3 47.2 45.8 42.9 38.4 35.3
[db/100 ft] 19.8 17.2 15.3 14.4 14 13.1 11.7 10.8
Contact assembly  
Dimensions  
 
 
A1 41.00 mm
B1 34.50 mm
B2 M12

Notes

- Depending on the cable length (L), the following length tolerances apply:

  0 m…<0.2 m: ± 10 mm | 0.2…4.0 m: + 40 mm | ≥ 4.0 m: + 1 %

- Illustrations similar

- Further cable length on request. The last three digits of the ordering information is the cable length in decimeters, e.g.ZKxxxx-xxxx-x020 = cable length 2.00 m

Installation dimensions  
Ordering information Length
ZK7000-0105-1010 1.00 m

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT G®, EtherCAT G10®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC®, XTS® and XPlanar® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.

 

© Beckhoff Automation GmbH & Co. KG 01/2020

 

The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.