ZK7001-0105-0xxx | EtherCAT P cable, AWG 24, PUR, drag chain suitable

M8, plug, straight, male, 4-pin, EtherCAT-P-coded – M8, flange, straight, female, 4-pin, EtherCAT-P-coded

Plugs

Electrical data Head A Head B
Rated current (Ethernet) 3 A at 40 °C according to IEC 61076-2-104 3 A at 40 °C according to IEC 61076-2-104
Rated voltage x-pin 4-pin, 50 VAC / 60 VDC 4-pin, 50 VAC / 60 VDC
Shielding yes yes
Insulation resistance ≥ 100 GΩ (according to IEC 60512) ≥ 100 GΩ (according to IEC 60512)
Mechanical data    
Installation size M8 M8
Connector type plug flange
Configuration straight straight
Contact type male female
Number of positions (face) 4-pin 4-pin
Coding EtherCAT-P-coded EtherCAT-P-coded
Recommended torque, nut 0.4 Nm 0.6 ... 0.8 Nm
Mating cycles ≥ 100 ≥ 100
Way of locking screw screw
Body colour black black
Body material TPU, UL 94 TPU, UL 94 HB
Coupling nut material CuZn, Ni GD-Zn, Ni
Lock nut material - CuZn, Ni
Seal FPM FPM
Contact carrier colour red red
Contact carrier material PA, UL 94 PA, UL 94
Contact material CuZn CuZn
Contact plating Ni, Au gal. Ni, Au gal.
Environmental data    
UV resistance yes yes
RoHS compliant yes yes
Ambient temperature, operation -30…+70 °C, -22…+158 °F -30…+70 °C, -22…+158 °F
Protection class IP 67 in screwed condition (according to IEC 60529) IP 67 in screwed condition (according to IEC 60529)
Pollution level 3/2 (according to IEC 60664-1) 3/2 (according to IEC 60664-1)

Cable

Electrical data  
Rated voltage max. 300 V (peak value, not for high voltage purposes)
Operating voltage ≤ 125 V (peak value, not for high voltage purposes)
Attenuation of shielding min. 80 dB between 30 MHz and 125 MHz (type test)
Insulation resistance ≥ 5GΩ * km
Unbalanced capacitance to ground ≤ 2000 pF/km
Mutual capacitance nom. 50 nF/km
Characteristic impedance (Ethernet) 100 Ω ±15 Ω
Loop resistance (Ethernet) 175.2 Ω/km
Dielectric strength wire/wire (Ethernet) 1 kV (50 Hz, 1 min.)
Dielectric strength wire/shield (Ethernet) 1 kV AC (50 Hz, 1 min.)/1 kV DC (50 Hz)
Signal running time (Ethernet) 4.8 ns/m
Electrical parameters (Ethernet) CAT 5e, according to EN 50288-2-2
Test voltage 750 V, 50 Hz, 1 min.
Mechanical data  
Cable structure (Ethernet) star quad
Cross section (Ethernet) 0.22 mm² (AWG24/7)
Min. bending radius, moved 15 x outer cable diameter
Min. bending radius, fixed installation 8 x outer cable diameter
Weight 42 kg/km (28.2 lb/1000 ft)
Outer cable diameter 5.2 mm ± 0.2 mm (0.2047" ± 0.0079")
Conductor material (Ethernet) copper, tinned
Optical covering factor of shielding (Ethernet) ≥ 85 %
Use drag-chain suitable
Max. number of cycles 3 million
Jacket colour black (RAL 9005) with red stripe (RAL 3020)
Material jacket PUR (polyurethane)
Wire colour code yellow, orange, white, blue
Wire insulation material PO (Polyolefine)
Printing on the jacket Beckhoff Automation GmbH & Co. KG - Germany - EtherCATp Cat5e AWG24/7 E170315 AWM 21198 AWM I/II A/B 80°C 300 V MM/YY RoHS
Printing colour white
Environmental data  
Operation temperature range, moved -30…+70 °C, -22…+158 °F
Operation temperature range, fixed installation -40…+80 °C, -40…+176 °F
UV resistance good
Oil resistance According to DIN EN 60811-404
Flame-retardant Horizontal flame test according to UL 1581 part 1090
Halogen-free According to IEC 60754 respectively DIN VDE 0472 part 815
Attenuation  
Max. insertion loss
Frequency [MHz] 1 4 10 16 20 31.25 62.5 100
[db/100 m] 3.0 6.0 9.5 12.1 13.5 17.1 24.8 32.0
[db/100 ft] 0.9 1.8 2.9 3.7 4.1 5.2 7.6 9.8
Min. near-end crosstalk attenuation
Frequency [MHz] 1 4 10 16 20 31.25 62.5 100
[db/100 m] 65 56.3 50.3 47.2 45.8 42.9 38.4 35.3
[db/100 ft] 19.8 17.2 15.3 14.4 14 13.1 11.7 10.8
Contact assembly  
Dimensions  
 
 
A1 41.00 mm
B1 34.50 mm
B2 M12

Notes

- Depending on the cable length (L), the following length tolerances apply:

  0 m…<0.2 m: ± 10 mm | 0.2…4.0 m: + 40 mm | ≥ 4.0 m: + 1 %

- Illustrations similar

- Further cable length on request. The last three digits of the ordering information is the cable length in decimeters, e.g.ZKxxxx-xxxx-x020 = cable length 2.00 m

Installation dimensions  
Ordering information Length
ZK7001-0105-0001 0.15 m
ZK7001-0105-0002 0.20 m
ZK7001-0105-0005 0.50 m
ZK7001-0105-0010 1.00 m

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC® and XTS® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.

 

© Beckhoff Automation GmbH & Co. KG 07/2018

 

The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.