ZS7000-0004 | Connector, field wireable, IP 65/67, screw

M8, socket, straight, female, 4-pin, EtherCAT-P-coded

Electrical data  
Rated voltage 30 V (according to IEC 61076-2-101)
Rated current 4 A at 40 °C (according to IEC 61076-2-101)
Shielding yes
Insulation resistance ≥ 100 MΩ (according to IEC 60512)
Mechanical data  
Installation size M8
Connector type socket
Configuration straight
Contact type female
Number of positions (face) 4-pin
Coding EtherCAT-P-coded
Wire termination screw connection
Recommended torque, nut 0.4 Nm
Mating cycles ≥ 100
Way of locking screw
Weight per piece 0.028 kg (0.0617 lb)
Body colour metal
Body material CuZn, Ni
Coupling nut material CuZn, Ni
Seal elastomers
O-ring elastomers
Contact carrier colour red
Contact carrier material PA 6, UL 94 V-0
Contact material CuZn, Ni b/Au 0.2 gal.
Contact plating Au over Ni
Max. wire cross section AWG26...AWG20 (0.14 mm²...0.5 mm²)
Max. cable outer diameter 4.9 - 6.5 mm
Environmental data  
UV resistance yes
RoHS compliant yes
Ambient temperature, operation -40...+85 °C, -40...+185 °F
Protection class IP 65/67 in screwed condition (according to IEC 60529)
Pollution level 3/2 (according to IEC 60664-1)
Dimensions  
 
A1 47.00 mm
A2 14.00 mm

Notes

- Illustrations similar

Ordering information  
ZS7000-0004 Socket, field assembly, EtherCAT P, IP 65/67, screw, straight, female, 4-pin, EtherCAT-P-coded, Ø 4.9 ... 6.5 mm
Accessories  
ZB8801-0000 torque wrench for hexagonal plugs, adjustable
ZB8801-0002 torque cable key, M12/wrench size 13, for ZB8801-0000

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC® and XTS® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.

 

© Beckhoff Automation GmbH & Co. KG 03/2019

 

The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.