1-channel relay output terminal 400 V AC, 300 V DC KL2631
Signal LED 1
Power contact
400 V
Power contact N
Power contact PE
Output 1
400 V
Top view 
Contact assembly 

KL2631 | 1-channel relay output terminal 400 V AC, 300 V DC

The KL2631 output terminal has a relay which has a single contact. The relay contact is connected to the power contacts, which are suitable for use at up to 400 V AC, and can be generally used for switching devices requiring mains power. The Bus Terminal indicates its signal state by means of a light emitting diode. In order to use the high voltage of up to 400 V AC, the KL2631 must be supplied via the KL9190 power feed terminal.

Technical data KL2631 | KS2631
Number of outputs 1 x make contacts for power contact
Nominal voltage 400 V AC/300 V DC
Switching capacity DC 300 V = 0.15 A; 24 V = 5 A; non-linear
Switching capacity AC 1500 VA
Switching voltage minimum power contact
Load type ohmic, inductive, lamp load
Max. output current 2 A
Switching current switching capacity DC: 300 V = 0.15 A; 24 V = 5 A; non-linear;
switching capacity AC: 1500 VA
Minimum permitted load no data
Lamp test, electronic ballast no data
Electrical isolation 500 V (K-bus/field potential)
Current consumption power contacts only load
Current consumption K-bus typ. 80 mA
Bit width in the process image 2 outputs
Operating cycles mech. (min.) 1 x 107
Operating cycles electr. (min.) 1.3 x 105 (2 A/250 V AC)
Configuration no address or configuration setting
Special features 400 V contact
Weight approx. 85 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all KSxxxx Bus Terminals
Approvals CE, GL