The KL8528 is an 8-channel digital output module. The outputs can be switched via a switch or specified by the controller. The status is indicated by a bicolour LED in green and yellow. The switching positions are readable via the PLC.
Technical data |
KL8528 |
Number of outputs |
8 |
Output current |
0.5 A (∑ 2 A) |
Nominal voltage |
24 V DC (-15 %/+20 %) |
Current consumpt. K-bus |
40 mA |
Power supply |
24 V connection |
Bus interface |
K-bus connection IN/OUT |
I/O connections |
flat-ribbon cable connection, 20-pin, shielded |
Switch settings |
auto/off/on |
Diagnostics LED |
bicolor LEDs, green and yellow |
Special features |
State of the switch can be read by the controller. |
Weight |
approx. 160 g |
Operating/storage temperature |
0…+55 °C/-25…+85 °C |
Relative humidity |
95 %, no condensation |
Vibration/shock resistance |
conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission |
conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos. |
IP 20/variable |
Approvals |
CE |
 |
 |
Accessories |
|
KL9309 |
Adapter terminal for manual operating modules of the KL85xx series, for each module an adapter terminal is necessary |
KL9020 |
K-bus extension end terminal, combined with KL9050 or KL85xx (manual operation modules) |
ZK8500-8282-7030 |
signal cable for manual operating modules of the KL85xx series, 20 x 0.14 mm², shielded, assembled at both ends with 20-pin plug, for terminals with ribbon cable connection, length 3 m |
ZK8500-8282-7040 |
signal cable for manual operating modules of the KL85xx series, 20 x 0.14 mm², shielded, assembled at both ends with 20-pin plug, for terminals with ribbon cable connection, length 4 m |
ZK8500-8282-7050 |
signal cable for manual operating modules of the KL85xx series, 20 x 0.14 mm², shielded, assembled at both ends with 20-pin plug, for terminals with ribbon cable connection, length 5 m |
ZK1090-0101-1005 |
K-bus extension cable, assembled at both ends with RJ45 plug, double-shielded, red, length 0.5 m |
ZK1090-0101-1010 |
K-bus extension cable, assembled at both ends with RJ45 plug, double-shielded, red, length 1 m |
ZK1090-0101-1020 |
K-bus extension cable, assembled at both ends with RJ45 plug, double-shielded, red, length 2 m |
ZK1090-0101-1030 |
K-bus extension cable, assembled at both ends with RJ45 plug, double-shielded, red, length 3 m |
ZK1090-0101-1050 |
K-bus extension cable, assembled at both ends with RJ45 plug, double-shielded, red, length 5 m |
 |
 |