Shield terminal KL9070
Power contact
+24 V
Power contact 0 V
Top view 
Contact assembly 
extended shock and vibration range 25g

KL9070 | Shield terminal

The KL9070 shield terminal provides eight terminal points with the potential of the mounting rail and enables the screening to be picked up without further modular terminal blocks or wiring. With its internal seamless copper surface, the KL9070 offers good screening between two Bus Terminals.

Technical data KL9070
Nominal voltage ≤ 60 V
Current load ≤ 10 A
Integrated fine-wire fuse
Power LED
Defect LED
Reported to K-bus
PE contact
Shield connection 8 x
Renewed infeed
Connection facility to additional power contact no
K-bus, looped through yes
Bit width in the process image 0
Electrical connection to DIN rail yes
Current consumption K-bus
Electrical isolation yes
Housing width 12 mm
Special features dissipation of EMC interference via large copper surfaces on the DIN rail
Weight approx. 50 g
Side by side mounting on Bus Terminals with power contact yes, left without PE
Side by side mounting on Bus Terminals without power contact yes
Operating/storage temperature 0…+55 °C/-25…+85 °C
Approvals/markings CE, UL, ATEX
Ex marking II 3 G Ex nA IIC T4 Gc