Shield terminal KL9195
Power contact
Power contact
Power contact
Power contact
Top view 
Contact assembly 

KL9195 | Shield terminal

The KL9195 Bus Terminal allows the supply voltage to be accessed a number of times via spring force terminals. It makes it unnecessary to use additional terminal blocks on the terminal strip. The KL9195 can be used for the connection of screens. The KL9195 connects the spring force contacts directly to the DIN rail, and can optimally ground incoming electromagnetic radiation. The two power contacts are looped through by the KL9195, allowing two wires to be connected to each power contact.

Technical data KL9195 | KS9195
Nominal voltage arbitrary up to 230 V AC
Current load ≤ 10 A
Integrated fine-wire fuse
Power LED
Defect LED
Reported to K-bus
PE contact
Shield connection 2 x
Renewed infeed
Connection facility to additional power contact 2
K-bus, looped through yes
Bit width in the process image 0
Electrical connection to DIN rail yes
Current consumption K-bus
Electrical isolation
Housing width 12 mm
Weight approx. 50 g
Side by side mounting on Bus Terminals with power contact only 2 power contacts
Side by side mounting on Bus Terminals without power contact
Operating/storage temperature 0…+55 °C/-25…+85 °C
Pluggable wiring for all KSxxxx Bus Terminals
Approvals/markings CE, UL, ATEX, GL
Ex marking II 3 G Ex nA IIC T4 Gc