TE5950 | TC3 Drive Manager 2 for AX8000 Multi-axis servo system

The TC3 Drive Manager 2 is a tool for commissioning the Beckhoff motion products. This tool is continuously developed, so you can download the latest version of the Drive Manager 2 and the device firmware here.

The following products are supported by the Drive Manager 2:

AX8000 power supply, axis and capacitor modules

TC3 Drive Manager 2 Setup
The setup program installs the Drive Manager 2, updates the drive ESI files and stores the firmware on your hard disk. The latest Drive Manager will be available once the setup is complete. A firmware update can then be performed if required.
For operation of AX8000 axis modules modules with Safety TwinCAT 3.1.4022.2 or higher is necessary.

Product	Version	Description
TC3 Drive Manager 2 Setup	1.1.39.0	Content from „TC3 Drive Manager 2 Setup“ TC3 Drive Manager 2 Version 1.1.22.0 Power supply modules: AX8620-0000, AX8640-0000 Firmware 1.03 build 0004 Axis modules: without safety: AX8108-0000, AX8118-0000, AX8206-0000 with safety STO / SS1: AX8108-0100, AX8118-0100, AX8206-0100 Firmware 1.02 build 0005 Capacitor module: AX8810-0000 Firmware 1.00 build 0021 Firmware dual use conform