Order reference
AS1050-wxyz |
|
| w = 0 |
smooth shaft |
| x = 0 |
standard motor without second shaft |
| x = 1 |
second shaft (for AS1020/AS1050/AS1060 only), necessary for encoder |
| y = 0 |
no incremental encoder |
| y = 1 |
incremental encoder, 24 V DC, 200 lines (only available for AS1020, AS1050, AS1060), requires x = 1 |
| y = 2 |
incremental encoder, 24 V DC, 1024 lines (only available for AS1020, AS1050, AS1060), requires x = 1 |
| z = 0 |
standard |
 |
|
| Accessories |
|
| EL7041 |
stepper motor EtherCAT Terminal, Imax = 5.0 A, 50 V, IP 20 |
| EP7041-3002 |
EtherCAT Box, industrial housing, Stepper Motor module 50 V DC, 5 A, 2 phases, with incremental encoder, 2 digital inputs 24 V DC, 1 digital output 24 V DC, for high speed applications |
| KL2541 |
stepper motor Bus Terminal, IMAX = 5 A, 50 V, IP 20 |
| ZK4701-04x1-2xxx |
supply cables for compact Drive Technology |
| ZK4000-5100-2xxx |
AS2000 encoder cable, drag-chain suitable, (5 x 0.25 mm²), shielded, for EL703x/EL704x/KL253x/KL254x |
| ZK4000-6200-2xxx |
motor cable for AS1000, assembled at both ends, 4 x 0.5 mm², 4 million bending cycles, bending radius = 55 mm (10 x OD) |
| ZK4000-6700-2xxx |
motor cable for AS1000, assembled at both ends, (4 x 0.5 mm²), shielded, 4 million bending cycles, bending radius = 55 mm (10 x OD) |
| ZK4000-5151-0xxx |
AS2000 encoder cable, drag-chain suitable, (5 x 0.25 mm²), shielded, for EP704x/EJ704x |
| ZK4000-6261-0xxx |
Motor cable for AS1000, assembled at both ends, (4 x 0.5 mm²), 4 million bending cycles, bending radius = (10 x OD) |
| AG1000-+PM52.i |
Planetary gear unit, Mn max. 4 Nm, acceleration torque ≥ 6 Nm, torsional backlash ≤ 0.7°, for AS1030 and AS1050 |
|
|
