AT9xxx-xxxx | XTS guide rails

The guide rail with the matching movers makes the XTS system a ready-to-use solution. However, the motor modules can also be used together with the magnetic plate sets as a custom solution without the XTS guide rail. The movers can be removed or inserted without tools through a lock by releasing two screws and removing part of the rail.

Movers and guide rail are optimally matched to each other. The geometry of the aluminium rail and the hard anodized aluminium of the surface in combination with the running surface of the mover rollers allow good running characteristics and low wear.

Ordering information  
XTS Standard guide rails, straight
AT9000-0250 guide rail, 250 mm, straight, suitable for 1 x straight motor module AT200x-0250 with/without feed
AT9000-0500 guide rail, 500 mm, straight, suitable for 2 x straight motor module AT200x-0250 with/without feed
AT9000-0750 guide rail, 750 mm, straight, suitable for 3 x straight motor module AT200x-0250 with/without feed
AT9000-1000 guide rail, 1000 mm, straight, suitable for 4 x straight motor module AT200x-0250 with/without feed
AT9000-1250 guide rail, 1250 mm, straight, suitable for 5 x straight motor module AT200x-0250 with/without feed
AT9000-1500 guide rail, 1500 mm, straight, suitable for 6 x straight motor module AT200x-0250 with/without feed
AT9000-1750 guide rail, 1750 mm, straight, suitable for 7 x straight motor module AT200x-0250 with/without feed
AT9000-2000 guide rail, 2000 mm, straight, suitable for 8 x straight motor module AT200x-0250 with/without feed
AT9000-2250 guide rail, 2250 mm, straight, suitable for 9 x straight motor module AT200x-0250 with/without feed
AT9000-2500 guide rail, 2500 mm, straight, suitable for 10 x straight motor module AT200x-0250 with/without feed
XTS Standard guide rails, straight with gate
AT9100-0250 guide rail, 250 mm, straight with gate, suitable for 1 x straight motor module AT200x-0250 with/without feed
AT9100-0500 guide rail, 500 mm, straight with gate, suitable for 2 x straight motor module AT200x-0250 with/without feed
AT9100-0750 guide rail, 750 mm, straight with gate, suitable for 3 x straight motor module AT200x-0250 with/without feed
AT9100-1000 guide rail, 1000 mm, straight with gate, suitable for 4 x straight motor module AT200x-0250 with/without feed
AT9100-1250 guide rail, 1250 mm, straight with gate, suitable for 5 x straight motor module AT200x-0250 with/without feed
AT9100-1500 guide rail, 1500 mm, straight with gate, suitable for 6 x straight motor module AT200x-0250 with/without feed
AT9100-1750 guide rail, 1750 mm, straight with gate, suitable for 7 x straight motor module AT200x-0250 with/without feed
AT9100-2000 guide rail, 2000 mm, straight with gate, suitable for 8 x straight motor module AT200x-0250 with/without feed
AT9100-2250 guide rail, 2250 mm, straight with gate, suitable for 9 x straight motor module AT200x-0250 with/without feed
AT9100-2500 guide rail, 2500 mm, straight with gate, suitable for 10 x straight motor module AT200x-0250 with/without feed
XTS Standard guide rails, 22.5
AT9020-0500 guide rail, 500 mm, 22.5° curve (positive curve, convex, radius constant), for AT9011-0050-xxxx, suitable for 1 x straight motor module AT200x-0250 with/without feed and 1 x 22.5° motor module AT202x-0250 with/without feed
AT9020-2250 guide rail set, 2250 mm, 180° curve (positive curve, convex, radius constant, 2 parts), for AT9011-0050-xxxx, consisting of 1 x AT9020-2250-1050 guide rail, 1250 mm, 90° curve, suitable for 1 x straight motor module AT200x-0250 with/without feed and 4 x 22.5° motor module AT202x-0250 with/without feed 1 x AT9020-2250-2050 guide rail, 1000 mm, 90° curve, suitable for 4 x 22.5° motor module AT202x-0250 with/without feed
AT9020-2250-0070 guide rail set, 2250 mm, 180° curve (positive curve, convex, radius constant, 2 parts), for AT9011-0070-xxxx, consisting of 1 x AT9020-2250-1070 guide rail, 1250 mm, 90° curve, suitable for 1 x straight motor module AT200x-0250 with/without feed and 4 x 22.5° motor module AT202x-0250 with/without feed 1 x AT9020-2250-2070 guide rail, 1000 mm, 90° curve, suitable for 4 x 22.5° motor module AT202x-0250 with/without feed
XTS Standard guide rails, -22.5°
AT9025-0500
XTS Standard guide rails, 45°
AT9040-0500 guide rail, 500 mm, 45° curve (positive curve, convex, radius constant), for AT9011-0050-xxxx, suitable for 1 x straight motor module AT200x-0250 with/without feed and 1 x 45° motor module AT204x-0250 with/without feed
AT9040-0750 guide rail, 750 mm, 90° curve (positive curve, convex, radius constant), for AT9011-0050-xxxx, suitable for 1 x straight motor module AT200x-0250 with/without feed and 2 x 45° motor module AT204x-0250 with/without feed
AT9040-0750-0070 guide rail, 750 mm, 90° curve (positive curve, convex, radius constant), for AT9011-0070-xxxx, suitable for 1 x straight motor module AT200x-0250 with/without feed and 2 x 45° motor module AT204x-0250 with/without feed
AT9040-1250 guide rail set, 1250 mm, 180° curve (positive curve, convex, radius constant, 2 parts), for AT9011-0050-xxxx, consisting of 1 x AT9040-1250-1050 guide rail, 750 mm, 90° curve, suitable for 1 x straight motor module AT200x-0250 with/without feed and 2 x 45° motor module AT204x-0250 with/without feed 1 x AT9040-1250-2050 guide rail, 500 mm, 90° curve, suitable for 2 x 45° motor module AT204x-0250 with/without feed
AT9040-1250-0070 guide rail set, 1250 mm, 180° curve (positive curve, convex, radius constant, 2 parts), for AT9011-0070-xxxx, consisting of 1 x AT9040-1250-1070 guide rail, 750 mm, 90° curve, suitable for 1 x straight motor module AT200x-0250 with/without feed and 2 x 45° motor module AT204x-0250 with/without feed 1 x AT9040-1250-2070 guide rail, 500 mm, 90° curve, suitable for 2 x 45° motor module AT204x-0250 with/without feed
AT9142-2000 guide rail set, 2000 mm, 360° circle (positive curve, convex, radius constant, 4 parts), for AT9011-0050-xxxx, consisting of 1 x AT9142-2000-1050 guide rail, 500 mm, 90° curve with gate, suitable for 2 x 45° motor module AT204x-0250 with/without feed 3 x AT9142-2000-2050 guide rail, 500 mm, 90° curve, suitable for 2 x 45° motor module AT204x-0250 with/without feed
XTS Standard guide rails, 180°
AT9050-0500-0070 guide rail, 500 mm, 180° curve (clothoid, radius not constant), for AT9011-0070-xxxx, suitable for 1 x 180° motor module AT2050-0500
AT9050-0500 guide rail, 500 mm, 180° curve (clothoid, radius not constant), for AT9011-0050-xxxx or AT9012-0050-xxxx, suitable for 1 x 180° motor module AT2050-0500
Accessories
ZX9001-0000 rail on support for XTS standard movers, suitable for XTS standard guide rails AT9100-xxxx