CU8801, CU8851
 
CU8801, CU8851 USB extension

CU8801, CU8851 | USB extension

The USB specification allows a distance of 5 m between the PC and the USB devices. A further 5 m of cable can be added by using a USB hub. In the construction of machines and plants, larger distances must be bridged without having to insert a USB hub every 5 m. The CU8801 USB Extender sends the 2.0 USB signal via a Cat.5 cable that can be up to 50 m long to the CU8851 USB Extended receiver, which converts the signal back to USB. Data rates of up to 480 Mbit/s can be transmitted. Both USB Extender boxes are designed for DIN rail mounting. The CU8801 transmitter is powered by the PC. The CU8851 receiver has an integrated 24 V DC power supply unit. The USB Extended 2.0 receiver is already integrated into the Control Panels from the CP29xx and CP39xx series.

Technical data CU8801 | USB Extender 2.0 Tx CU8851 | USB Extender 2.0 Rx
Type USB Extended 2.0 transmitter box USB Extended 2.0 receiver box
Housing plastic housing for DIN rail installation
Interfaces 1 USB input with USB B socket to be connected to the PC in maximum 1 m distance and 1 USB Extended 2.0 output with RJ45 socket for up to 50 m CAT 5 cable 1 USB Extended 2.0 input with RJ45 socket for up to 50 m CAT 5 cable and 1 USB output with USB A socket to be connected to an USB device in maximum 5 m distance
USB transfer rate up to 480 Mbit/s according to USB 2.0
Protection class IP 20
Operating temperature 0…+55 °C
Dimensions (W x H x D) 34 mm x 98 mm x 77 mm
Power supply unit power supply via USB 24 V DC power supply
Approvals/markings CE, ATEX, IECEx CE
Ex-Marking II 3 G Ex nA IIC T4 Gc
II 3 D Ex tc IIIC T135 °C Dc
Ex nA IIC T4 Gc
Ex tc IIIC T135 °C Dc
Additional Information quick error analysing with diagnostic LEDs
Related products  
CU8800-0010 USB Extender 1.1 Tx for CP69xx and CP79xx
CU8850 USB Extender 1.0 Rx