DétacherÉpinglerFermer

Siège social France
Beckhoff Automation Sarl

Immeuble "Le Montréal", ZA de Courtaboeuf 19 bis, avenue du Québec
91140 Villebon-sur-Yvette, France

+33 1692 98370
info@beckhoff.fr
www.beckhoff.fr

EK1300 | EtherCAT P coupler

EK1300 | EtherCAT P coupler

EK1300 | EtherCAT P coupler

Power LEDs
E-bus
Output for US
Input for
power contacts
Power contacts
Output for UP
Signal input EtherCAT P
Signal output EtherCAT P
EK1300 | EtherCAT P coupler

EK1300 | EtherCAT P coupler

Hannover Messe 2016: EtherCAT P

Hannover Messe 2016: EtherCAT P

The EK1300 EtherCAT P coupler integrates the EtherCAT Terminals into the EtherCAT P network. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation. A station consists of a coupler and any number of EtherCAT Terminals that are automatically detected and individually displayed in the process image

 

Special features:

  • Connection technology: 2 x EtherCAT P-coded M8 sockets
  • Power supply via EtherCAT P connection
  • Number of EtherCAT Terminals in the overall system: up to 65,535

 

The EK1300 has two EtherCAT P-coded M8 connections. The upper EtherCAT P interface is used to connect the coupler to the network, the lower EtherCAT P-coded M8 socket is used for optional continuation of the EtherCAT P topology. In addition, the EK1322 EtherCAT P junction or the EK1310 EtherCAT P extension can be used for extending or creating a line or star topology.

Since EtherCAT P integrates the power supply and the communication on a single line, an additional power supply for the coupler via the terminal points is no longer required. Depending on the application, the system and sensor supply US or the peripheral voltage for actuators UP can be bridged to the power contacts.

Product status:

Regular delivery

Product information

Loading content ...

Loading content ...

Loading content ...

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2021 - Terms of Use