AT9001 | Magnetic plate sets
The magnetic plate sets with the product designation AT9001 are part of the AT90xx mover. When using guide rails with movers from third-party suppliers or with self-designed movers, the magnetic plate set is available individually. The magnetic traveling fields of the XTS motor modules generate a linear movement with the aid of the magnetic plate sets. A set consists of two magnetic plates. One of the two magnetic plates is equipped with a sturdy encoder flag, which allows non-contact position detection of the movers.
With all variants, the "Mover Standard" and "Mover 1" magnetic plate sets are differentiated. "Mover 1" is always recognized as servo axis 1 and used as the first servo axis after starting. All subsequent movers (standard movers) are counted upwards. This results in a fixed assignment of the axis numbers to the movers, which is maintained even after the system has been switched off. The benefits for an application are as follows:
- When the system restarts, the parameters of the individual movers can be retained.
- The condition of a product on a mover can be clearly tracked.
- The system contains movers with various tools that can be reassigned after a system restart.
- The system does not have to be cleared after a fault, but can be driven to from the current mover position.
|Product variants||Number of magnets||Nominal force||Peak force||Length||Magnet pitch||Mover||Possible curve segments|
|AT9001-x450-1640||4||25 N||70 N||<50 mm||50 mm||all||all|
|AT9001-x550-1640||5||30 N||100 N||50 mm||60 mm||all||all|
|AT9001-x775-1640||7||45 N||130 N||75 mm||85 mm||third party||all|
|AT9001-xAA0-1640||10||75 N||210 N||100 mm||110 mm||third party||≥ 45°|
Force specifications refer to straight sections