LeválasztásHozzáadásBezárás

CX8191 | Embedded PC with BACnet/IP

CX8191 | Embedded PC with BACnet/IP

CX8191 | Embedded PC with BACnet/IP

Power LEDs
E-bus or K-bus
Coupler
supply
Input for
power contacts
Power contacts
Front flap
Ethernet port
Link/Act
Ethernet RJ45 (switched)
Link/Act
Ethernet RJ45 (switched)
Address selector
CX8191 | Embedded PC with BACnet/IP

CX8191 | Embedded PC with BACnet/IP

The CX8191 is a control system with a switched Ethernet port. It supports the BACnet protocol. E-bus or K-bus terminals can be attached as required; the CX8191 automatically recognizes the type of I/O system connected during the start-up phase.

The control system is programmed with TwinCAT 3 via the fieldbus interface or the additional Ethernet interface. TwinCAT 3 licenses must be ordered via the TwinCAT 3 price list. The BACnet license is already installed on the device and does not need to be ordered separately.

BACnet (Building Automation Control Network) is a standardized, manufacturer-independent communication protocol for building automation. Areas of application include HVAC, lighting control, safety and fire alarm technology.

In conjunction with the EL6861 BACnet-MS/TP terminals, the CX8191 can act as a router to MS/TP networks including support for several MS/TP networks. In addition, further protocols and services can be supported, such as OPC UA, MQTT or Modbus TCP/RTU. Therefore, the CX8191 is a virtually universal device that can be used very flexibly, from control tasks through to gateway functions.

Product status:

Regular delivery

Product information

Loading content ...

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2021 - Terms of Use