解除修正閉じる

CX2042 | Basic CPU module

CX2042 | Basic CPU module

CX2042 | Basic CPU module

Status LEDs
Battery compartment
(behind the flap)
CFast
Ethernet and USB connection
DVI connection
Multi optional interface
(e.g. RS232, PROFIBUS,
CANopen)
CX2042 | Basic CPU module

CX2042 | Basic CPU module

Embedded PCs from the CX2000 product family

CX20x2 Embedded PC

SPS IPC Drives | Performance leap for Embedded PCs

Embedded PCs from the CX2000 product family

CX20x2 Embedded PC

SPS IPC Drives | Performance leap for Embedded PCs

The CX2042 has an Intel® Xeon® CPU with a clock rate of 2.2 GHz (4 cores). A fan with ball bearings and speed monitoring is integrated into the basic CPU module. In addition to the CPU, the basic module also contains the main memory with a size of 8 GB RAM, optionally available with up to 64 GB. The controller boots from a CFast flash memory card where both the operating system as well as user programs and data are stored.

The CPU has an internal 128 kB NOVRAM, which acts as a persistent data memory if no UPS is used.

The use of TwinCAT 3 allows automation tasks to be distributed across the various cores of the Intel® Xeon® CPU.

All system modules from the CX2000 series for left- or right-sided functional extensions can be connected. Internally the modules are connected via PCI Express and can be plugged to the CPU in the field.

The power supply for the CPU module comes from a CX2100-0014 power supply module. Up to two mass storage modules (either CX2550-0010 CFast modules or CX2550-0020 2½-inch SSD modules) can be plugged in between the power supply unit and the CPU, allowing the use of up to three mass storage devices in total.

Product status:

regular delivery

Product information

Technical dataCX2042
ProcessorIntel® Xeon® D-1527 2.2 GHz
Number of cores4
GraphicsAMD E8860, 2 GB GDDR5
Flash memoryslot for CFast card, card not included
Main memory8 GB DDR4 RAM (expandable ex factory to 64 GB)
Persistent memory128 kB NOVRAM integrated
Interfaces2 x RJ45 10/100/1000 Mbit/s, 1 x DVI-I, 4 x USB 3.0, 1 x optional interface
Coolingintegrated fan with ball bearings and speed monitoring
Diagnostics LED1 x power, 1 x TC status, 1 x flash access, 2 x bus status
Clockinternal battery-backed clock for time and date (battery exchangeable)
Operating systemWindows 10 IoT Enterprise 2016 LTSB, Windows 10 IoT Enterprise 2019 LTSC, Windows 10 IoT Enterprise 2021 LTSC, TwinCAT/BSD
Control softwareTwinCAT 3 runtime (XAR)
I/O connectionvia power supply module (E-bus or K-bus, automatic recognition)
Power supply24 V DC (-15%/+20%)
Max. power consumption95 W
Dimensions (W x H x D)204 mm x 99 mm x 91 mm
Weightapprox. 1650 g
Relative humidity95%, no condensation
Operating/storage temperature-25…+50°C/-40…+85°C
EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4
Vibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27
Protection ratingIP20
Approvals/markingsCE, UL
TwinCAT 3 platform levelHigh Performance (70); please see here for an overview of all the TwinCAT 3 platform level
Ordering information
CX2042-0100CPU module, no operating system, no TwinCAT
CX2042-0150CPU module, Microsoft Windows 10 IoT Enterprise 2016 LTSB, 64 bit, no TwinCAT
CX2042-0155CPU module, Microsoft Windows 10 IoT Enterprise 2016 LTSB, 64 bit, TwinCAT 3 runtime (XAR), no licenses included
CX2042-0170CPU module, Microsoft Windows 10 IoT Enterprise 2019 LTSC, 64 bit, no TwinCAT
CX2042-0175CPU module, Microsoft Windows 10 IoT Enterprise 2019 LTSC, 64 bit, TwinCAT 3 runtime (XAR), no licenses included
CX2042-0185CPU module, TwinCAT/BSD, TwinCAT 3 runtime (XAR), no licenses included
CX2042-0190CPU module, Microsoft Windows 10 IoT Enterprise 2021 LTSC, 64 bit, no TwinCAT
CX2042-0195CPU module, Microsoft Windows 10 IoT Enterprise 2021 LTSC, 64 bit, TwinCAT 3 runtime (XAR), no licenses included

TwinCAT/BSD requires a CFast flash card with a minimum capacity of 20 GB

Windows 10 IoT Enterprise requires a CFast flash card with a minimum capacity of 40 GB.

TwinCAT 3 runtime (XAR) is preinstalled, without licenses. Please order TwinCAT 3 licenses separately from the TwinCAT 3 Price List.

Options
CX2900-0010Operating system preequipped on 2½-inch HDD/SSD for CX20x0, CX20x2 and CX20x3.
Requires the extension module CX2550-0020 and one 2½-inch HDD/SSD.
CX2900-0205memory extension to 16 GB DDR4 RAM, instead of 8 GB DDR4 RAM for CX2042, CX2062 and CX2072
CX2900-0206memory extension to 32 GB DDR4 RAM, instead of 8 GB DDR4 RAM for CX2042, CX2062 and CX2072
CX2900-0207memory extension to 64 GB DDR4 RAM, instead of 8 GB DDR4 RAM for CX2042, CX2062 and CX2072
Optional interfaces
CX2042-N010DVI-D interface, additional DVI-D port for clone or extended display mode.
Is not supported by TwinCAT/BSD.
CX2042-N011DisplayPort interface, additional DisplayPort for clone or extended display mode.
Is not supported by TwinCAT/BSD.
CX2042-N030RS232 interface, D-sub plug, 9-pin
CX2042-N031RS485 interface, D-sub socket, 9-pin, configuration as an end point, without echo, termination on
CX2042-N031-0001RS485 interface, D-sub socket, 9-pin, configuration as an end point, with echo, termination on
CX2042-N031-0002RS485 interface, D-sub socket, 9-pin, configuration as drop point, without echo, termination off
CX2042-N031-0003RS485 interface, D-sub socket, 9-pin, configuration as drop point, with echo, termination off
CX2042-N031-0004RS422 interface, D-sub socket, 9-pin, configuration as full duplex end point, termination on
CX2042-N0672 x Ethernet interface (2 x RJ45, 1/10 Gbit/s), version of the interfaces in the upper front of the device
CX2042-N1672 x Ethernet interface (2 x SFP + cage, 1/10 Gbit/s), version of the interfaces in the upper front of the device
CX2042-M1122 x EtherCAT master interface
CX2042-B110EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45)
CX2042-M310PROFIBUS master interface, D-sub socket, 9-pin
CX2042-B310PROFIBUS slave interface, D-sub socket, 9-pin
CX2042-M510CANopen master interface, D-sub plug, 9-pin
CX2042-B510CANopen slave interface, D-sub plug, 9-pin
CX2042-M930PROFINET RT, controller interface, Ethernet (2 x RJ45 switch)
CX2042-B930PROFINET RT, device interface, Ethernet (2 x RJ45 switched)
Accessories
CX1900-0101DVI-to-VGA passive adaptor for connecting a standard desktop VGA monitor to the CX system (singles out the VGA signals of the DVI-I interface).
CX1900-0102Spare battery suitable for CX10x0, CX81x0, CX5xxx, CX90x0, CX20xx
– lithium button cell type CR2032, 3V/225 mAh
– follow polarity when installing
CX2900-002620 GB CFast card, 3D flash, extended temperature range (only for Windows CE or TwinCAT/BSD operating systems)
CX2900-003840 GB CFast card, 3D flash, extended temperature range
CX2900-004080 GB CFast card, 3D flash, extended temperature range
CX2900-0042160 GB CFast card, 3D flash, extended temperature range
CX2900-0044320 GB CFast card, 3D flash, extended temperature range
CX2900-0101Housing locking clips (black) for the CX52x0, CX53x0, CX56x0 and CX20xx series
10 locking pin sets (each set consisting of two pieces)
CX2900-0102Cover for left-side module bus connector, 5 pieces
CX2900-0103Spare fan cartridge for CX2040, CX2042, CX2043, CX2062, CX2072 and CX2020, CX2030, CX2033 with fan option
– cartridge consisting of chassis and 60 mm fan
– simple exchange in the field due to wireless installation
– dimensions (W x H x D) 67 x 62 x 16 mm

Loading content ...

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2024 - Terms of Use