EL3632-0020 | EtherCAT Terminal, 2-channel analog input, IEPE/accelerometer, 16 bit, 50 ksps, factory calibrated
+24 V
EL3632-0020 | EtherCAT Terminal, 2-channel analog input, IEPE/accelerometer, 16 bit, 50 ksps, factory calibrated
Distributed Clocks: the integrated time management system in EtherCAT
For demanding applications: calibrated analog inputs
Measurement technology easily configured: Analog EtherCAT input terminals.
Measurement technology simply integrated: With the analog EtherCAT Terminals.
Accelerometers with IEPE interface can be directly connected to the EL3632-0020 EtherCAT Terminal. The measuring signals are analyzed on the PC via the TwinCAT library. This enables all benefits of the PC platform, such as performance and flexibility, to be fully utilized. Alternatively, custom software can be used for the analysis. The terminal can be adapted to individual requirements through configurable filters and supply currents.
A galvanically isolated measurement configuration can be achieved using the EL9560. Through interfacing via EtherCAT and support of the distributed clocks function, the measurement results – and any detected defects – can be precisely allocated to an axis position.
The desired calibration certificate can be downloaded from here using the respective serial number.
Product status:
product announcement
Product information
- Technical data
- Accessories
- Documentation and downloads
- Beckhoff Information System
- Further information
- Related products
| Technical data | EL3632-0020 |
|---|---|
| Number of inputs | 2 |
| Technology | Condition Monitoring (IEPE), oversampling recording |
| Signal type | differential |
| Signal voltage | IEPE constant current supply and recording of modulated AC voltage |
| Distributed clocks | yes |
| Input filter limit frequency | analog parameterizable 5th order low-pass filter up to 25 kHz, typically 0.05 Hz high-pass filter |
| Conversion time | 20 μs (max. 50 ksamples/s) |
| Measuring range | default ±5 V up to 25 kHz, ±250 mV up to 10 Hz |
| Power supply UV | 24 V DC via power contacts |
| Sensor voltage | max. power contact voltage less 1 V |
| Sensor state monitoring | yes, through monitoring of the bias voltage |
| Supply current IEXCITE | typ. 2/4/8 mA (separately configurable for both channels) |
| Resolution | 16 bit (incl. sign) |
| Measurement error/ uncertainty | < ±0.5 % (DC; relative to full scale value) |
| Calibration certificate (analog) | factory calibrated |
| Current consumption power contacts | 24 V, typ. 20 mA + load |
| Current consumption E-bus | typ. 220 mA |
| Special features | automatic anti-aliasing function, wire breakage detection, with calibration certificate |
| Weight | approx. 60 g |
| Operating/storage temperature | 0…+55 °C/-25…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/see documentation |
| Approvals/markings | CE, UL, ATEX, IECEx |
| Ex marking | II 3 G Ex nA IIC T4 Gc |
| Housing data | EL-12-8pin |
|---|---|
| Design form | compact terminal housing with signal LEDs |
| Material | polycarbonate |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | labeling of the BZxxx series |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG 28…14, st*: AWG 28…14, f*: AWG 26…16 |
| Stripping length | 8…9 mm |
| Current load power contacts | Imax: 10 A |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2023 - Terms of Use