DetachFixClose

Headquarters Singapore
Beckhoff Automation Pte. Ltd.

#05-07/08 Nordic European Centre
3 International Business Park
Singapore 609927, Singapore

+65 6697 6220
info@beckhoff.com.sg
www.beckhoff.com/zh-sg/

EL5151-0021 | EtherCAT Terminal, 1-channel encoder interface, incremental, 24 V DC HTL, 100 kHz, with 1 x digital output 24 V DC

EL5151-0021 | EtherCAT Terminal, 1-channel encoder interface, incremental, 24 V DC HTL, 100 kHz, with 1 x digital output 24 V DC

EL5151-0021 | EtherCAT Terminal, 1-channel encoder interface, incremental, 24 V DC HTL, 100 kHz, with 1 x digital output 24 V DC

Signal LED A
Output LED
Signal LED C
Signal LED B
Signal LED
Latch
Power contact
+24 V
Power contact 0 V
A
Output
C
B
+24 V
0 V
Latch
Top view 
Contact assembly 
EL5151-0021 | EtherCAT Terminal, 1-channel encoder interface, incremental, 24 V DC HTL, 100 kHz, with 1 x digital output 24 V DC

EL5151-0021 | EtherCAT Terminal, 1-channel encoder interface, incremental, 24 V DC HTL, 100 kHz, with 1 x digital output 24 V DC

The EL5151-0021 EtherCAT Terminal is an interface for the connection of a 24 V incremental encoder (24 V HTL). An additional 24 V digital input is available for storing the counter status. A compare function can be realized via a parameterizable 24 V DC output, which is set after reaching a preset counter value. The output is switched independently of the PLC cycle. The integrated workpiece measurement function enables logging of the start and end values of the counter. The measurement is triggered by the digital input. Both values are output separately as 32-bit values.

As an alternative, the EL5151-0021 can be used as a up/down counter. The 24 V supply of the encoder can be provided directly via the terminal connection points.

 

Special features:

  • compare function via parameterizable 24 V DC output
  • integrated workpiece measurement via 24 V digital input
  • save, set counter
  • optionally usable as 24 V up/down counter

 

The use of encoder profiles enables simple and fast linking of the process data for motion control applications.

Product status:

regular delivery

Product information

Technical dataEL5151-0021
Technologyincremental encoder interface, HTL 24 V DC
Number of channels1
Encoder connection1 x A, B, C: 24 V DC, single-ended connection, EN 61131-2, type 1, “0”: < 5 V DC, “1”: > 15 V DC, typ. 5 mA
Additional inputslatch input, 24 V DC
Additional outputs1 x 24 V DC output, 0.5 A
Encoder operating voltage24 V DC (-15%/+20%), (generated from the 24 V DC power contacts)
Counter1 x 32 bit
Limit frequency400,000 increments/s (with 4-fold evaluation), corresponding to 100 kHz
Quadrature decoder4-fold evaluation
Distributed clocks
Nominal voltage24 V DC (-15%/+20%)
Current consumption power contactstyp. 100 mA + load
Resolution
Special featureslatch function, parameterizable output 24 V DC (compare function), workpiece measurement
Weightapprox. 50 g
Operating/storage temperature0…+55°C/-25…+85°C
Relative humidity95%, no condensation
Vibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.IP20/variable
Approvals/markingsCE, UL
Housing dataEL-12-8pin
Design formcompact terminal housing with signal LEDs
Materialpolycarbonate
Dimensions (W x H x D)12 mm x 100 mm x 68 mm
Installationon 35 mm DIN rail, conforming to EN 60715 with lock
Side by side mounting by means ofdouble slot and key connection
Markinglabeling of the BZxxx series
Wiringsolid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver
Connection cross-sections*: 0.08…2.5 mm²,
st*: 0.08…2.5 mm²,
f*: 0.14…1.5 mm²
Connection cross-section AWGs*: AWG28…14,
st*: AWG28…14,
f*: AWG26…16
Stripping length8…9 mm
Current load power contactsImax: 10 A

*s: solid wire; st: stranded wire; f: with ferrule

Loading content ...

Loading content ...

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2024 - Terms of Use