The EJ2128 EtherCAT plug-in module connects binary control signals from the automation device on to the actuators at the process level with electrical isolation and generates load currents with outputs that are protected against overload and short-circuit. The module contains eight channels, optionally with a rated load voltage of 3.3 V DC or 5 V DC.
Special features:
- 3.3/5 V DC outputs
- suitable for different load types (resistive, lamp load)
- max. output current 0.02 A per channel
- overload and short-circuit proof CMOS/push-pull outputs
Product status:
regular delivery
Product information
| Technical data | EJ2128 |
|---|---|
| Number of outputs | 8 |
| Rated load voltage | 5 V DC/3.3 V DC |
| Load type | resistive, lamp load |
| Distributed clocks | – |
| Max. output current | ±20 mA (short-circuit proof) per channel, type CMOS output/push-pull |
| Switching times | typ. TON: < 1 µs, TOFF: < 1 µs |
| Auxiliary power current | typ. 12 mA + load |
| Current consumption E-bus | typ. 80 mA |
| Electrical isolation | 500 V (E-bus/field potential) |
| Weight | approx. 30 g |
| Operating temperature | -25…+60°C |
| Storage temperature | -40…+85°C |
| Relative humidity | 95%, no condensation |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| Protect. rating/installation pos. | IP20/see documentation |
| Approvals/markings | CE |
| Housing data | EJ_12_16pin_Code34 |
|---|---|
| Weight | approx. 30 g |
| Protection rating | IP20 |
| Material | polycarbonate |
| Dimensions | Width (single) | 12 mm |
| Dimensions | Height | 66 mm |
| Dimensions | Depth | 55 mm |
| Installation | 2 x 20-pin socket strip on signal distribution board |
| Connection mechanism | application-specific plug on the signal distribution board |
| Mechanical coding | yes |
| Position of the coding pins | 3, 4 |
| Material compliance | EJ2128 |
|---|---|
| REACH SVHC | no |
| POP | compliant |
| RoHS | compliant with exemption |
| RoHS exemption | 7c-I: Lead-containing electrical and electronic components in glass and ceramic materials, excluding dielectric ceramics in capacitors |
| China-RoHS | www.beckhoff.com/china-rohs-io |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2026 - Terms of Use