EJ4002 | EtherCAT plug-in module, 2-channel analog output, voltage, 0…10 V, 12 bit
EJ4002 | EtherCAT plug-in module, 2-channel analog output, voltage, 0…10 V, 12 bit
EJ4002 | EtherCAT plug-in module, 2-channel analog output, voltage, 0…10 V, 12 bit
EtherCAT plug-in modules of the EJ series
Efficient series machine manufacturing: plug-and-play in the control cabinet
EtherCAT plug-in modules: Bus Terminals for circuit boards
The EJ4002EtherCAT plug-in module generates signals in the range between 0 and 10 V. The voltage is supplied to the process level with a resolution of 12 bits and is electrically isolated. The output channels have a common ground potential. The module combines two channels in one housing. The output stages are powered by the 24 V supply. The signal state is indicated by light emitting diodes.
Product status:
regular delivery
Product information
| Technical data | EJ4002 |
|---|---|
| Power supply | via the E-bus |
| Number of outputs | 2 |
| Signal voltage | 0…10 V |
| Distributed clocks | yes |
| Load | > 5 kΩ (short-circuit proof) |
| Measurement error/uncertainty | < 0.1% (relative to full scale value) |
| Output error | < ±0.1% (relative to end value) |
| Resolution | 12 bit |
| Electrical isolation | 500 V (E-bus/signal voltage) |
| Conversion time | ~ 150 µs |
| Current consumption periphery | – |
| Auxiliary power current | typ. 20 mA |
| Current consumption E-bus | typ. 90 mA |
| Special features | Optional watchdog: user-specific output value with ramp; user synchronization can be activated. |
| Weight | approx. 30 g |
| Operating temperature | -25…+60°C |
| Storage temperature | -40…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/see documentation |
| Approvals/markings | CE, UL |
| Housing data | EJ_12_16pin_Code17 |
|---|---|
| Design form | EtherCAT I/O plug-in module |
| Material | polycarbonate |
| Installation | on signal distribution board |
| Mechanical coding | EJ plug-in module: signal-specific coding pins on the housing, signal distribution board: holes in the printed circuit board |
| Position of the coding pins | 1, 7 |
| Locking | latching lug in circuit board cut-out |
| Connection method | field wiring: application-specific wiring level on the signal distribution board,
EJ plug-in module: 2 x 20-pin socket strip |
| Dimensions (W x H x D) | 12 mm x 66 mm x 55 mm |
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2025 - Terms of Use