EJ6070 | EtherCAT plug-in module, license key for TwinCAT 3.1
EJ6070 | EtherCAT plug-in module, license key for TwinCAT 3.1
EJ6070 | EtherCAT plug-in module, license key for TwinCAT 3.1
EtherCAT plug-in modules of the EJ series
TwinCAT 3.1 offers an option to manage TwinCAT software licenses via the EtherCAT plug-in module EJ6070. The EJ6070 embodies the hardware license key in the modular EtherCAT I/O system. Data transfer takes place via EtherCAT.
The module is equipped with a local data memory for saving TwinCAT 3.1 license files. It is accessed via TwinCAT 3.1. The functionally equivalent C9900-L100 license key USB stick also features this data memory.
Both the EtherCAT plug-in module and the USB stick are available with factory pre-installed licenses: EL6070-0033, C9900-L100-0033.
Note that the EJ6070 and EJ6070-0033 are two different devices in terms of EtherCAT and are therefore not interchangeable in the EtherCAT I/O configuration.
Product status:
regular delivery
Product information
| Technical data | EJ6070 |
|---|---|
| Technology | EtherCAT license key module |
| Memory | 1 Mbyte |
| Current consumption E-bus | typ. 130 mA |
| Distributed clocks | – |
| Special features | transmission of license information via EtherCAT |
| Electrical isolation | 500 V (E-bus/field potential) |
| Weight | approx. 30 g |
| Operating temperature | -25…+60°C |
| Storage temperature | -40…+85°C |
| Relative humidity | 95%, no condensation |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/see documentation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| Approvals/markings | CE |
| Housing data | EJ_12_16pin_Code25 |
|---|---|
| Design form | EtherCAT I/O plug-in module |
| Material | polycarbonate |
| Installation | on signal distribution board |
| Mechanical coding | EJ plug-in module: signal-specific coding pins on the housing, signal distribution board: holes in the printed circuit board |
| Position of the coding pins | 2, 5 |
| Locking | latching lug in circuit board cut-out |
| Connection method | field wiring: application-specific wiring level on the signal distribution board,
EJ plug-in module: 2 x 20-pin socket strip |
| Dimensions (W x H x D) | 12 mm x 66 mm x 55 mm |
| Ordering information | |
|---|---|
| EJ6070 | EtherCAT plug-in module, license key for TwinCAT 3.1 |
| EJ6070-0033 | EtherCAT plug-in module, license key for TwinCAT 3.1, factory-installed licenses |
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2025 - Terms of Use