The KL9070 shield terminal provides eight terminal points with the potential of the mounting rail and enables the screening to be picked up without further modular terminal blocks or wiring. With its internal seamless copper surface, the KL9070 offers good screening between two Bus Terminals.
Product status:
regular delivery
Product information
Technical data | KL9070 |
---|---|
Current load | ≤ 10 A |
Integrated fine-wire fuse | – |
Power LED | – |
Defect LED | – |
Diagnostics | – |
Current consumption K-bus | – |
Nominal voltage | ≤ 60 V |
Electrical isolation | yes |
Reported to K-bus | – |
PE contact | – |
Shield connection | 8 x |
Renewed infeed | – |
Connection facility to additional power contact | no |
K-bus, looped through | yes |
Bit width in the process image | 0 |
Electrical connection to DIN rail | yes |
Housing width | 12 mm |
Special features | dissipation of EMC interference via large copper surfaces on the DIN rail |
Weight | approx. 50 g |
Side by side mounting on Bus Terminals with power contact | yes, left without PE |
Side by side mounting on Bus Terminals without power contact | yes |
Operating/storage temperature | 0…+55°C/-25…+85°C |
Approvals/markings | CE, UL, ATEX, IECEx |
Ex marking | ATEX: II 3 G Ex ec IIC T4 Gc IECEx: Ex ec IIC T4 Gc |
Housing data | KL-12-8pin | KS-12-8pin |
---|---|---|
Design form | compact terminal housing with signal LEDs | terminal housing with pluggable wiring level |
Material | polycarbonate | |
Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm | |
Installation | on 35 mm DIN rail, conforming to EN 60715 with lock | |
Side by side mounting by means of | double slot and key connection | |
Marking | labeling of the BZxxx series | |
Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver | |
Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² | s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² |
Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 | s*: AWG28…16, st*: AWG28…16, f*: AWG26…16 |
Stripping length | 8…9 mm | 9…10 mm |
Current load power contacts | Imax: 10 A |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
© Beckhoff Automation 2024 - Terms of Use