EL6692 | EtherCAT bridge terminal

The EtherCAT bridge terminal EL6692 enables data exchange between EtherCAT strands with different masters. It also enables synchronisation of the distributed clocks of the individual strands. The power supply on the primary side (E-bus) comes from the E-bus, on the secondary side (RJ 45) via an external connection. If several EL6692 are used, data traffic to the terminals on the other side can continue in the event of a power supply failure on one side.

Technical data	EL6692
Ports	primary: E-bus, secondary: 2 x RJ 45 EtherCAT input/output
Cable length	100 m 100BASE-TX, secondary port
Hardware diagnosis	status LEDs
Power supply	primary: via the E-bus, secondary: via connector
Electrical isolation	500 Vrms (E-bus/secondary side)
Current consumption	E-bus: 120 mA; external: 60 mA/24 V (see documentation)
Bit width in the process image	16 bit SYNC input + IO input/output
Weight	approx. 85 g
Operating/storage temperature	0…+55 °C/-25…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable