2-channel DC motor output stage 24 V DC, 1 A KL2532
Error B LED
Warning B
EnableB LED
Power LED
Error A LED 
Warning A 
EnableA LED 
Run LED 
Power contact
+24 V
Power contact 0 V
Power tap
Top view 
Contact assembly 
extended shock and vibration range 25g

KL2532 | 2-channel DC motor output stage 24 V DC, 1 A

The KL2532 Bus Terminal enables direct operation of two DC motors. It is galvanically isolated from the K-bus. The speed is preset by a 16 bit value from the automation unit. The output stage is protected against overload and short-circuit. The Bus Terminal contains two channels that indicate their signal state by means of light emitting diodes. The LEDs enable quick local diagnosis.

Technical data KL2532 | KS2532
Technology compact Drive Technology
Load type DC brush motor, inductive
Number of channels 2
Number of outputs 1 x DC motor per channel
Number of inputs 1 x end position per channel
Connection technology direct motor connection
Output current max. 1 A per channel
Max. output current 2 x 1 A (short-circuit proof, thermal-overload proof for both channels together)
Resolution max. 10 bit current, 16 bit speed
Encoder input signal
Pulse frequency
Current consumption power contacts typ. 30 mA + load
Current consumption K-bus typ. 50 mA
Bit width in the process image 48 inputs/outputs: 2 x 16 bit data, 2 x 8 bit control/status
Electrical isolation 500 V (K-bus/field potential)
Weight approx. 55 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/see documentation
Pluggable wiring for all KSxxxx Bus Terminals
Approvals/markings CE, UL
Related products  
KL2552 2-channel DC motor output stage 50 V DC, 5 A, Bus Terminal, IP 20
EL7332 DC motor EtherCAT Terminal, 24 V DC, Imax = 1.0 A, 2-channel
EL7342 DC motor EtherCAT Terminal, 50 V DC, Imax = 3.5 A, 2-channel
EP7342 EtherCAT Box, industrial housing, 2-channel DC motor output stage 50 V DC, 3.5 A, IP 67