Analog Input
KL3362
+24 V
24 V Output
Input 1
Ground
24 V Trigger
0 V
Input 2
Ground
No wire
Error LED
Output LED
Trigger LED
Top view
Contact assembly
Connection
KL3362 | 2-channel oscilloscope terminal -10…+10 V
The KL3362 analog input terminal makes it possible to perform non-central preliminary processing of analog values. The input values are digitised with a 14 bit resolution and written into an internal memory. An efficient processor can pre-process the values. Limit values and maximum and minimum values can be determined or monitored. The KL3362 can also carry out envelope curve monitoring. A trigger starts the cyclical processes. The result or all the measured values are transported to the higher-level automation unit.
| Technical data | KL3362 | KS3362 |
|---|---|
| Number of inputs | 2 analog, 1 trigger |
| Power supply | via the K-bus |
| Signal voltage | -10…+10 V |
| Internal resistance E1-GND, E2-GND | > 500 kΩ |
| Resolution | 14 bits + sign |
| Conversion time | < 100 µs, configurable (10 µs with fast sampling mode) |
| Measuring error | < ±0.5 % (relative to full scale value) |
| Internal memory | 32 kbytes |
| Trigger | configurable |
| Current consumption K-bus | typ. 120 mA |
| Bit width in the process image | input/output: 2 x 16 bit data (2 x 8 bit control/status per channel) |
| Weight | 75 g |
| Operating/storage temperature | 0…+55 °C/-25…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27/29 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos. | IP 20/variable |
| Pluggable wiring | for all KSxxxx Bus Terminals |