KM2614 | 4-channel relay module, 230 V AC, 16 A, manual operation

The KM2614 terminal module combines four pluggable power relays in one fieldbus module. The high switching capacity of 16 A at 230 V AC enables direct mains connection of consumers with high current consumption. The relays are positioned at the top and can therefore be exchanged easily. Each relay can be manually switched to the ON status. A seal indicates the initial manual operation.

Technical data	KM2614
Number of outputs	4 x change-over
Nominal switching voltage	250 V AC, 30 V DC
Nominal switching current	16 A
Minimum switching load	5 mA (10 V DC)
Electrical isolation	1.5 kVrms (K-bus/field potential); 2.5 kV rated surge voltage, overvoltage category III
Current consumption K-bus	typ. 15 mA
Current consuption 24 V DC	50 mA for each active relay
Bit width in the process image	4 outputs
Operating cycles mech. (min.)	5 x 106
Operating cycles electr. (min.)	1 x 106 (1 A AC/250 V AC)
Dimensions (W x H x D)	99 mm x 100 mm x 62 mm
Configuration	no address or configuration setting
Weight	approx. 250 g
Operating/storage temperature	0…+55 °C/-25…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable

Accessories
ZB2602	relay, manual operation, 230 V AC, 16 A, coil 24 V, spare part KM2614